stds-802-16: Letter Ballot #4 Comment Report
The Letter Ballot #4 Comment Report, with 700 comments, is now posted:
Document Number: IEEE 802.16-02/01
URL: <http://ieee802.org/16/docs/02/80216-02_01.zip>
Unzip it to get the file "80216-02_01.USR", which will open in Commentary.
We are now entering the reply-comment phase, in which we are
accepting replies to these comments. As you read through, please fill
in the fields:
Recommendation:
Proposed Resolution:
Reason for Recommendation:
I'll submit a set of specific instructions too. The reply-comment
deadline is Wednesday, 16 January.
Roger
>I have posted the final Letter Ballot #4 results:
>
> http://ieee802.org/16/tga/ballot04/report.html
>
>I'll adjust the results only to correct any errors. Please let me
>know if your vote is recorded incorrectly.
>
>We received 109 ballots, enough to make the ballot valid. However,
>the approval ratio of 72.2% is below the 75% required to pass.
>
>The procedure at this point is explained in subclause 3.1.4 of the
>ballot announcement <http://ieee802.org/16/docs/01/80216-01_63.pdf>:
>
>>3.1.4 Failed Ballots
>>Should the approval rate be less than 75%, the Working Group shall
>>nevertheless proceed with comment resolution and then offer
>>"Disapprove" voters the opportunity to change their vote to
>>"Approve". Should this process result in a 75% or higher approval
>>rate, the approval criterion in 3.1.2 shall be considered met.
>>
>>Should this process fail to achieve the 75% approval rate, a new
>>draft shall be prepared in accordance with the comment resolutions.
>>A new Working Group Letter Ballot of the resulting draft shall be
>>initiated by vote of the Working Group or at the discretion of the
>>Working Group Chair.
>
>I am preparing a comment report. Once issued, it will be the basis
>of a "Reply Comment" process through January 16.
>
>Thanks for your participation.
>
>Roger