Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

FW: +++P802.3-2005/Cor1/D1.2 Working Group 2nd recirculation ballot



All,

The 2nd Working Group recirculation ballot for IEEE P802.3-2005/Cor1 (IEEE 
802.3au) draft D1.2 opened today. Non IEEE 802.3 voting members are 
welcome to participate in submitting comments by using the instructions in 
the email below but are requested to only submit technical (T) and 
editorial (E) comments. ER and TR comments submitted by Non IEEE 802.3 
voting members will be treated as E and T comments.

Regards,
  David Law
 

----- Forwarded by David Law/GB/3Com on 17/02/2006 20:59 -----


IEEE 802.3 Working Group Voters, Observers, and Liaisons:

This is the announcement of the electronic IEEE 802.3 Working Group 2nd 
recirculation ballot on P802.3-2005 Corrigendum 1 (802.3au) on DTE 
isolation. If you were an 802.3 voter at the time of the initial ballot of 
this project (December 2005), you are a member of the P802.3-2005/Cor1 WG 
ballot group. If you are a member of the WG ballot group but didn't vote 
on the initial ballot, or if you wish to change your previous vote, please 
cast a ballot on this recirculation ballot. If you did previously cast a 
ballot and your vote on this recirculation is the same, you do not need to 
cast your ballot again as your previous vote is carried over.

Instructions for accessing the draft, casting your ballot and submitting 
comments follow this announcement. Because multiple 802.3 WG ballots may 
run in parallel, proper subject lines on ballots and comments are 
essential for your ballot and comments to be accepted.

TITLE:

Draft: Information technology -- Telecommunications and information 
exchange between systems -- Local and metropolitan area networks -- 
specific requirements Part 3: Carrier Sense Multiple Access with Collision 
Detection (CSMA/CD) Access Method and Physical Layer Specifications

Corrigendum 1

BALLOT SCOPE:

As a recirculation WG ballot, the scope of the ballot is limited to only 
the changes made to create P802.3-2005/Cor1/D1.2, and the unresolved 
negative comments against P802.3-2005/Cor1/D1.1 (no unresolved D1.1 
comments).

BALLOT OPEN:
17 February 2006

BALLOT CLOSE:
4 March 2006

Thank you for your participation in this ballot and careful review of the 
draft.

Bob Grow, Chair IEEE 802.3
Phone: 858-391-4622
Email: bob.grow@ieee.org

-----------------------------------------------------------------

****INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3-2005/Cor1/D1.2

Instructions for accessing the ballot documents, casting your ballot and 
submitting comments follow.

HOW TO ACCESS THE DRAFT:

The ballot documents are posted for your review for balloting purposes 
only, and neither the documents nor access information should be copied or 
redistributed to others in violation of document copyrights.

Comments are to be submitted against the change marked (diff) document. 
The Cor1/D1.2 document with differences marked against Cor1/D1.1 may be 
downloaded from:

http://www.ieee802.org/3/private/maint/iso_corr/d1.2/P802_cor1_D1p2_CMP.pdf
Login:    <Please e-mail David_Law@ieee.org if you need this information>
Password: <Please e-mail David_Law@ieee.org if you need this information>

There were no new unresolved comments on D1.1, though some unresolved 
comments from D1.0 were discussed during comment resolution.  A file of 
these unresolved negative comments may be downloaded from:

http://www.ieee802.org/3/au/comments/D1.1/802.3au_D1p1_unresolved.pdf

The P802.3-2005/Cor1/D1.2 draft without change marks is also provided for 
your reference (do not use for comments) and may be downloaded using the 
above login and password from:

http://www.ieee802.org/3/private/maint/iso_corr/d1.2/P802_cor1_D1p2.pdf

The file of all Cor1/D1.1 comments may be downloaded from:

http://www.ieee802.org/3/au/comments/D1.1/802.3au_D1p1.pdf

The documents are posted in Adobe "pdf" document format and can be 
downloaded and printed if desired. If you do not have Adobe Acrobat 
Reader, it is available for free downloading from Adobe at:

http://www.adobe.com/prodindex/acrobat/readstep.html

HOW TO CAST YOUR BALLOT

To assure your ballot is counted, please:

1) send your ballot to:
stds-802-3-ballot@ieee.org

2) paste the following line into the subject field:
Cor1/D1.2 Ballot

3) paste into the message body and complete the ballot form below:


-----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

P802.3-2005/Cor1/D1.2 WORKING GROUP BALLOT

Your Name:___________________________

___    APPROVE WITHOUT COMMENT

___    APPROVE WITH COMMENT
(All comments are non-binding)

___    DISAPPROVE

(A voter must attach specific comments for remedy. Some or all comments 
are binding.)

___    ABSTAIN, Lack of Expertise
___    ABSTAIN, Lack of Time
___    ABSTAIN, Other ___________________


-----------------------end ballot form--------------------

HOW TO SUBMIT COMMENTS

Acceptable comment types:

E  = Editorial
ER = Editorial Required (a binding comment that is part of a DISAPPROVE 
vote, therefore only appropriate for an 802.3 voting member)
T  = Technical
TR = Technical Required (a binding comment that is part of a DISAPPROVE 
vote, therefore only appropriate for an 802.3 voting member)

1. Prepare your comments using the text (ASCII) form below.  This will 
make it possible for the editor to properly record and track all 
submissions.  Make as many copies of the template as necessary and submit 
as an ascii text file or as part of your e-mail.


------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

CommentID: (Leave Blank)
CommenterName:
CommenterEmail:
CommenterPhone:
CommenterCellPhone:
CommenterCompany:
Clause:
Subclause:
Page:
Line:
CommentType: (E, ER, T, or TR)
Comment:
CommentEnd:
SuggestedRemedy:
RemedyEnd:

--------------------end comment template------------------

2.  Send your comments to:
stds-802-3-ballot@ieee.org

and paste into the subject line:
Cor1/D1.2 Comments