IEEE 802.11TM   TGaa Recirculation Letter Ballot 999 Instructions
 

 

 

These instructions apply for IEEE 802.11 Letter Ballot 999 (LB999) which is a Recirculation ballot asking the question "Should P802.11aa D6.0 be forwarded to sponsor ballot?".

 

Important notes:

  • This is a 15-day Recirculation letter ballot and the voter's pool for this ballot is the same voter pool that was used for the original letter ballot that passed the 75% threshold for 802.11aa, i.e., Letter Ballot 164. If you have voted on any of LB164, 170, 173, 175, 179 and 182, you are not required to vote on this ballot. Your most recent ballot will be carried forward.
    If you wish to change your vote, you must respond to this ballot.

  • You must follow the instructions below to vote.  Do not send an email to vote.  Voting by any method other than the web-based process described below will invalidate your vote.

  • Failure to follow these instructions will result in your vote being discarded as an invalid vote.

  • Not voting on letter ballots or sending an invalid vote can affect your voting privileges.

    •

  

This ballot opens on: Tue Aug 16, 2011 at 23:59 Eastern Time USA and closes 15 days later on Wed Aug 31, 2011 at 23:59 Eastern Time USA.  (Add reminder to calendar).
   

 

Motion: " Should P802.11aa D6.0 be forwarded to sponsor ballot? "

 

Type of Motion: Recirculation

 

To Obtain the draft and the supporting documentation: 

 

Document

  Hyperlink
Draft Draft P802.11aa_D6.0.pdf
Redlined Doc n/a

Resolution

Doc

 11-11-1118-01-00aa-proposed-resolutions-to-lb182-comments.xls
Comment
 Template
Pool LB999 Voters
CA Document n/a

 

The draft is password protected in accordance with IEEE 802 Policies and Procedures. To obtain the draft, use the username and the password supplied to voting members for the 802.11 WG private area.
 

 

 

Cast Your Vote Here  and follow the instructions below.  See also the IEEE-SA ePoll User Guide.

 
Step 1

Voting

Click on the green button above.  You should see a voting screen similar to what's shown to the right.

 

Enter your affiliation from the drop-down list and select one of the available votes.

 

Press OK.

Step 2

Commenting		 Once you have voted,  the links "Add comment" and "Upload comments" will appear on the voting screen.

You can re-enter the voting screen as often as you like by pressing big green button above in order to enter comments.

If you wish to enter comments,  please vote either approve or disapprove.		  
Single Comments Press the "Add comment" link from the voting screen.

Enter values for the fields (see table below for help on what to put in these fields).

Then press "OK".
Review your vote and comments After entering a comment,  the voting screen shows a list of comments,  as shown the the right.
Multiple comments To upload multiple comments press the "Upload comments" link from the voting screen.

You can download a .csv file as a template using the "download a blank CSV..." link.

Fill in your comments.  Then browse to the file and press the OK button.

The system will not let you upload comments that do not meet the requirements described below in "Comments".

 

Comments

Should you wish to submit comments, the following instructions indicate how to fill in the fields of the comment.

 
Comment Describe the problem here.
Category Select one of:  Technical,  Editorial or General.
If you are filling in a comment spreadsheet,  be sure to use the full word spelled out as above.  If you don't exactly match one of these three terms,  the system will not let you upload your spreadsheet.
Page Number If you choose to include a page / line number reference in your comments, please do so by entering it in these columns.  In recirculation ballots make sure you quote the numbering from the clean draft,  not the redline draft,  as they will be different.
Line Number
Subclause Include there the number of the heading that your comment applies to (e.g. 5, 2.1, 4.2.3., C, C.3, 8.2a.4b).  If you have a comment that applies to the entire document put "General" in the section field. Don't put "all", "many", "various" or any other word you may personally fancy. If the field contains anything other that a (sub)clause number or "General", the comment may be discarded and your vote possibly invalidated.  If your comment relates to a table/figure, place the clause in which the table/figure resides in this column and put a reference to the table/figure at the start of the comment.  Put only the clause number and not any words such as "clause" or "annex".
Proposed Change If you do not recommend a change the comment may be skipped as you have not asked the group to do anything.

Please keep the explanation of the comment separate from what you want done as a result of your reasoning. The voting group is too large for the task group to be interpreting what you are requesting.

Please remember that the operating rules state that all "No" votes MUST be accompanied by comments which include specific reasons and enough information for the group to understand what you desire in order to change your "no" to a "yes". Simply saying "not good enough" is insufficient as the task group cannot reasonably be expected to understand what would satisfy the commenter and so invalidation of the vote is justifiable.
Must Be Satisfied This field appears on the web user-interface only if you have voted "no".  Clearly it is present in the spreadsheet regardless of vote.

This field indicates whether the comment must be satisfied in order for you to change your vote to "yes".

Any voter that votes "no" must have at least one comment marked "must be satisfied=yes" as to support for their "no" vote.  This field must not be left blank for any comment in this case, as the intent of the voter regarding this comment would be ambiguous.

If you are uploading a spreadsheet,  be sure to use either "Yes" or "No" in this column, as any other value might stop the system accepting your comments.  Any voter that votes "yes" should not have any comments marked "yes" in this column.

 

 

 

Bruce Kraemer

IEEE 802.11 Working Group Chair

E-mail: bkraemer@marvell.com

 

 

 

Adrian Stephens

IEEE 802.11 Working Group Vice Chair / Balloting Coordinator

E-mail: adrian.p.stephens@intel.com

 

 

 

Graham Smith

IEEE 802.11 TGaa Chair

E-mail: Graham.Smith@dspg.com

 

 

 

Tue Aug 16, 2011