Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hello Robert,Thanks a lot!
I am sorry that I make a mistake for the dot11SMTbase, namely dot11SMTbase15 already exists with an allocated value of 109. What I actually would like to request is an ANA value for dot11SMTbase16 because Some MIB values are depreciated in the previous group dot11SMTbase15. Please advise if I can use the allocated value of 115 for dot11SMTbase16.Regards,
EdwardOn Thu, Jun 6, 2019 at 3:35 PM Stacey, Robert <robert.stacey@xxxxxxxxx> wrote:Hello Edward,
Here are your allocations:
TransactionID
Type
Status
User
Group
Resource
Ref Doc
Ref Subclause
Ref Location
Name
Req Value
Description
Allocated Value
Requested
1110
Allocate
Pending
Edward Au
IEEE Std 802.11-2016
C.3
dot11SMTbase15
Some MIB values are depreciated in the previous group dot11SMTbase13.
2019-06-06
1111
Allocate
Pending
Edward Au
IEEE Std 802.11-2016
C.3
dot11HTMACAdditions4
Some MIB values are depreciated in the previous group dot11HTMACAdditions3.
2019-06-06
1112
Allocate
Pending
Edward Au
IEEE Std 802.11-2016
C.3
dot11SMTRMConfig3
Some MIB values are depreciated in the previous group dot11SMTRMConfig2.
2019-06-06
1113
Allocate
Pending
Edward Au
IEEE Std 802.11-2016
9.4.2.1
Table 9-77
RSN Extension
A legacy element ID (Table 9-94 in D2.2) for an RSN Extension element introduced by CIDs #2715 and #2716 and per the working group motion in the closing plenary of the 2019 May interim.
2019-06-06
1116
Allocate
Pending
Edward Au
IEEE Std 802.11-2016
9.4.2.1
Table 9-77
Mirrored SCS
A new Extended Capabilities element (Table 9-151 in D2.2) for Mirrored SCS introduced by CID #2693.
2019-06-06
1117
Allocate
Pending
Edward Au
IEEE Std 802.11-2016
C.3
dot11MSCSActivated
A new MIB for Dot11StationConfigEntry
2019-06-06
1118
Allocate
Pending
Edward Au
IEEE Std 802.11-2016
9.4.2.1
Table 9-77
TCLAS Mask element
A new extended element ID (Table 9-94 in D2.2) for TCLAS Mask element introduced by CID #2693.
2019-06-06
I have not made (new) allocation for Beacon protection. I had previously done this for Emily:
1094
Allocate
Pending
Emily Qi
IEEE Std 802.11-2016
9.4.2.27
Table 9-135
Beacon Protection Enabled
The AP sets the Beacon Protection Enabled field to 1 when dot11BeaconProtectionEnabled is true. Otherwise, it is set to 0.
2019-05-01
No
1095
Allocate
Pending
Emily Qi
IEEE Std 802.11-2016
C.3
dot11BeaconProtectionEnabled
This is a control variable. It is written by an external management entity. This variable indicates whether beacon protection is enabled.
2019-05-01
No
1096
Allocate
Pending
Emily Qi
IEEE Std 802.11-2016
9.6.14.29
Table 9-360
Beacon Protection Failure
2019-05-01
No
-Robert
-----Original Message-----
From: Edward Au [mailto:edward.ks.au@xxxxxxxxx]
Sent: Tuesday, June 04, 2019 12:09 PM
To: Stacey, Robert <robert.stacey@xxxxxxxxx>
Cc: STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-EDITORS] ANA request for REVmd
Hello Robert,
My bad - thanks for sharing with me the correct version of the ANA request spreadsheet. Now, I can choose the correct numbering space (the previous spreadsheet I use shows only dot11Groups or Capabilities
- sorry!)
Actually, all I am asking for are "Allocate", and there is no
"Release" request. Please see if the instructions filled therein are
clear enough.
Regards,
Edward
On Fri, May 31, 2019 at 3:00 PM Stacey, Robert <robert.stacey@xxxxxxxxx> wrote:
>
> Hello Edward,
>
> I am having some issues parsing your spreadsheet.
>
> The first issue has to do with "Type of Request". If you are releasing a number you should use "Release". Currently all your entries are "Allocate", but some look like they should be release.
>
> The second issue is with the "Resource Name", i.e. the numbering space from which the allocation is made. Your requests are all either dot11Groups or Capabilities, which doesn't seem right.
>
> You might need use the request form in the attached since the dropdown for the "Resource Name" in your sheet doesn't have all the entries.
>
> -Robert
>
> -----Original Message-----
> From: *** IEEE stds-802-11-editors List ***
> [mailto:STDS-802-11-EDITORS@xxxxxxxx] On Behalf Of Edward Au
> Sent: Friday, May 31, 2019 6:55 AM
> To: STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx
> Subject: [STDS-802-11-EDITORS] ANA request for REVmd
>
> --- This message came from the IEEE 802.11 Editors' Reflector ---
>
> Hi Robert,
>
> Enclosed please find a few requests from TGmd on ANA. We hope we
> would get these ANA assignments for the publication of Draft 2.3.
>
> Thanks and Regards,
> Edward
>
> ______________________________________________________________________
> _________
>
> IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this CLOSED reflector. We use this valuable tool to communicate on the issues at hand.
>
> SELF SERVICE OPTION:
> Point your Browser to -
> http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-EDITORS
> and then amend your subscription on the form provided. If you require removal from the reflector press the LEAVE button.
>
> Further information can be found at:
> http://www.ieee802.org/11/Email_Subscribe.html
> ______________________________________________________________________
> _________
--
To unsubscribe from the STDS-802-11-EDITORS list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-EDITORS&A=1
Attachment:
ANA request - 11md - update2.xls
Description: MS-Excel spreadsheet