Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-REG] Wireless E911 Location Accuracy Requirements - comments close May 12, 2014




  Peter,

  It looks like these are requirements for Commercial Mobile Radio Services
providers which is like mobile phone companies and paging services, etc.
Does this apply to users of unlicensed frequencies, or more specifically to
the frequencies that 802.11 uses?

  regards,

  Dan. 

On 3/28/14 12:56 PM, "Peter Ecclesine (pecclesi)" <pecclesi@xxxxxxxxx> wrote:

Correction

Dates:

Submit comments on or before May 12, 2014 and reply comments by June 11, 2014.

 

 

From: *** Regulatory and Spectrum Allocation Topics *** [mailto:STDS-802-11-REG@xxxxxxxx] On Behalf Of Peter Ecclesine (pecclesi)
Sent: Friday, March 28, 2014 12:34 PM
To: STDS-802-11-REG@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-REG] Wireless E911 Location Accuracy Requirements - comments close June 11, 2014

 

https://www.federalregister.gov/articles/2014/03/28/2014-06618/wireless-e911-location-accuracy-requirements

 

Peter Ecclesine, Technology Analyst

MS SJ-14-4 170 West Tasman Dr, San Jose, CA 95134-1706

Ph 408/527-0815, FAX 408/525-9256

"Time doesn't fool around."  "Without Prejudice" U.C.C. 1-207

 

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-REG and then press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-REG and then press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-REG and then press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________