| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
In red may need wordsmith – which can be done live unless we get email suggestions.
Add the following row at the end of Table 8-115, _________________________________________________________________________________________________ | <ANA> | FILS Capability | When dot11FILSActivated is true, the FILS Capability field is set to 1 to | | | | indicate the STA supports the FILS procedures and is set 0 otherwise. | -------------------------------------------------------------------------------------------------------------------------------------------------- Add the following sentence at the beginning of first paragraph of subclause 10.25.1 “A STA that supports FILS shall set the FILS Capability field within the STA’s Extended Capabilities element to 1 and shall set the FILS Capability field to 0 otherwise.
A FILS STA shall support at least one non-DSSS/CCK rate.” Insert the following paragraph in subclause 10.1.4.3.8 before the last paragraph on page 62 in TGai Draft 0.5, “Additionally, an AP with dot11FILSActivated equal to true, receiving a Probe Request frames containing a FILS Capability field in the Extended Capabilities element equal to 1 shall not transmit the Probe Response frame in a PPDU using
DSSS or CCK (Clause 16 or Clause 17) rates.” Thanks S IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this CLOSED reflector. We use this valuable tool to communicate on the issues at hand. SELF SERVICE OPTION: Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAI and then amend your subscription on the form provided. If you require removal from the reflector press the LEAVE button. Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________ |