Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGAI] Fixed Annex C



Thank you, Adrian.

I'll make a conformance group.

regards,

On 2015/01/07 18:30, Stephens, Adrian P wrote:
Thank you, Hitoshi.

To address the question in the word file,  yes, you should include these variables in a
group and a compliance statement.
When P802.11ai goes through 802.11 MDR,  one of the requirements is that no new warnings of this type are created.   So you can choose when to do this,  but not to not do it.

Best Regards,

Adrian P STEPHENS

Tel: +44 (1793) 404825 (office)
Tel: +1 (971) 330 6025 (mobile) ⇐ please note new number

----------------------------------------------
Intel Corporation (UK) Limited
Registered No. 1134945 (England)
Registered Office: Pipers Way, Swindon SN3 1RJ
VAT No: 860 2173 47

-----Original Message-----
From: *** 802.11 TGai - Fast Initial Link Set-Up *** [mailto:STDS-802-11-TGAI@xxxxxxxx] On Behalf Of Hitoshi MORIOKA
Sent: 07 January 2015 08:43
To: STDS-802-11-TGAI@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGAI] Fixed Annex C

Hi all,

I have uploaded the fixed Annex C.
https://mentor.ieee.org/802.11/dcn/15/11-15-0028-00-00ai-fixed-annex-c.doc

regards,

--
SRC Software
Hitoshi MORIOKA (hmorioka@xxxxxxxxxxxx)

_______________________________________________________________________________

IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this CLOSED reflector. We use this valuable tool to communicate on the issues at hand.

SELF SERVICE OPTION:
Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAI and then amend your subscription on the form provided.  If you require removal from the reflector press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________


--
SRC Software
Hitoshi MORIOKA (hmorioka@xxxxxxxxxxxx)

_______________________________________________________________________________

IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this
CLOSED reflector. We use this valuable tool to communicate on the issues at hand.

SELF SERVICE OPTION:
Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAI and
then amend your subscription on the form provided.  If you require removal from the reflector
press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________