| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
I was hoping that is what you meant.
I suspect there are complications with this, however I am not the expert. RR From: Philippe Klein
[mailto:philippe@xxxxxxxxxxxx] RR, I apologize if my post was not clear
enough: my requirement is not to not to require any frame to be encrypted but
to allow to run MACsec on 802.11GLK links IF the security has been
enabled on the BSS and IF the frames are in EDP format. /Philippe From: Richard Roy
[mailto:dickroy@xxxxxxxxxxxx] FWD to the list of an earlier reply to
Philippe. RR From: Richard Roy [mailto:dickroy@xxxxxxxxxxxx] Are all 802.3 Ethernet frames
encrypted? I would not want to see such a requirement in general.
THere are a large number of scenarios where encryption is NOT necessary! RR From: Philippe Klein [mailto:philippe@xxxxxxxxxxxx] The
current P802.11ak_D0.06 draft version does not mention any requirement in
regard to the encryption of EPD formatted frames. I
suggest we add a requirement that EPD formatted frames must be encrypted in a
way compatible with IEEE 802.1AE (MACsec) as the 802.3/Ethernet frames are
(notice that 802.11ad crypto mode is AES-GCM, the same crypto mode that the
default Cypher Suite of 802.1AE). If
you agree I will post a contribution that could be discuss next Monday during
the conf call. Thank
you /Philippe Philippe Klein, PhD |Technical Director, Broadband Technology Group Broadcom Corporation | Golan House, (M) +972 54 313 4500 | philippe@xxxxxxxxxxxx _______________________________________________________________________________
IF YOU
WISH to be Removed from this reflector, PLEASE DO NOT send your request to this
CLOSED reflector. We use this valuable tool to communicate on the issues at
hand. SELF
SERVICE OPTION: Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAK
and then amend your subscription on the form provided. If you require removal
from the reflector press the LEAVE button. Further
information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________
_______________________________________________________________________________
IF YOU
WISH to be Removed from this reflector, PLEASE DO NOT send your request to this
CLOSED reflector. We use this valuable tool to communicate on the issues at
hand. SELF
SERVICE OPTION: Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAK
and then amend your subscription on the form provided. If you require removal
from the reflector press the LEAVE button. Further
information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________ IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this CLOSED reflector. We use this valuable tool to communicate on the issues at hand. SELF SERVICE OPTION: Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAK and then amend your subscription on the form provided. If you require removal from the reflector press the LEAVE button. Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________ _______________________________________________________________________________ IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this CLOSED reflector. We use this valuable tool to communicate on the issues at hand. SELF SERVICE OPTION: Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAK and then amend your subscription on the form provided. If you require removal from the reflector press the LEAVE button. Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________ |