Re: [STDS-802-11-TGAX] Spec Framework r8

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Robert,

I have two comments:

1. In 3.3.3 Coding, I think that PHY Motion 36 on Sept 17^th also made the following modification:

Support of LDPC code for both TX and RX is mandatory for HE STAs declaring support for at least one of HE 40/80/160/80+80 SU-PPDU bandwidths,

2. In 3.2.1 General, the new Figure-1 for HE-NDP format, there is a field named “TBD” while the text says “The frame format of HE-NDP is based on the 11ax SU PPDU format”. Then in 3.2.2 Figure-2, this field is named “R-LSIG”. I guess that the reason of this “TBD” field is mainly because of the order of the SPs/Motions (Motion 37 vs Motion 51) in this week’s PHY ad hoc meeting, and I think it is a straightforward change to make these two figures consistent (don’t need any new tech proposal or motion for this change).

Thanks,

Hongyuan

From: *** 802.11 TGax - HEW - High Efficiency WLAN *** [mailto:STDS-802-11-TGAX@xxxxxxxx] On Behalf Of Stacey, Robert
Sent: Friday, September 18, 2015 3:16 PM
To: STDS-802-11-TGAX@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGAX] Spec Framework r8

Hello All,

A revision of the SFD is available: https://mentor.ieee.org/802.11/dcn/15/11-15-0132-08-00ax-spec-framework.docx

This revision adds text that passed motion this week. I also added the missing MAC Motion 23 from July.

Regards,

-Robert

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAX and then press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.