Hello Youhan,
Apologies for missing your email during the review.
I would submit a comment against D5.0 identifying these problems.
If the group decides that these issues must be fixed before we go to SA ballot then the group can resolve the comment(s) with an accept (or revised) and we will produce a D6.0 for WG ballot. We have the option
of fixing these during SA ballot (by submitting a comment when SA ballot starts).
This may not be the only issue with the draft. If there are other issues that must be fixed (other comments that the group decides must be addressed) then there will be a D6.0 for WG ballot anyway.
-Robert
From: *** 802.11 TGax - HEW - High Efficiency WLAN *** [mailto:STDS-802-11-TGAX@xxxxxxxx]
On Behalf Of Youhan Kim
Sent: Monday, October 14, 2019 9:25 AM
To: STDS-802-11-TGAX@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGAX] Error in TGax D5.0
Hello, Robert and Osama,
Thank you very much for D5.0. Unfortunately, there are some errors in D5.0 which does not reflect the comment resolution done on D4.X. Will there be a D5.0.1 to fix this?
Thanks.
Youhan
From: Youhan Kim <youhank@xxxxxxxxxxxxxxxx>
Sent: Thursday, October 3, 2019 12:59 PM
To: robert.stacey@xxxxxxxxx; Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; George Cherian <gcherian@xxxxxxxxxxxxxxxx>;
Abhishek Patil <appatil@xxxxxxxxxxxxxxxx>; Bin Tian <btian@xxxxxxxxxxxxxxxx>;
xiaogang.c.chen@xxxxxxxxx;
laurent.cariou@xxxxxxxxx; po-kai.huang@xxxxxxxxx;
jkneckt@xxxxxxxxx;
matthew.fischer@xxxxxxxxxxxx; hwang@xxxxxxxxxxxxx;
ron.porat@xxxxxxxxxxxx;
hongyuan@xxxxxxxxxxx; liwenchu@xxxxxxxxxxx;
brianh@xxxxxxxxx; Yongho Seok <yongho.seok@xxxxxxxxx>; Menzo Wentink <mwentink@xxxxxxxxxxxxxxxx>;
yzhang@xxxxxxxxxxx;
tianyu_wu3@xxxxxxxxx; Kaiying.lu@xxxxxxxxxxxx;
pmonajem@xxxxxxxxx
Subject: RE: TGax D5.0 ready for review
Hi, Robert.
Thanks for D5.0. Following are some missing edits (PageLine based on clean D5.0).
- P437L47
- Change “set to 11000000” to “set
to 192 (11000000 in binary representation)”
- CID 20742, 11-19/1530r0, Motion #932 in 11-19/1409r6
- Change “set to 11000000” to “set
to 192 (11000000 in binary representation)”
- P195L62
- CID 20934, 11-19/1531r1, Motion #932 in 11-19/1409r6
- P446L43
- CID 20934, 11-19/1531r1, Motion #932 in 11-19/1409r6
Thanks.
Youhan
From: Stacey, Robert <robert.stacey@xxxxxxxxx>
Sent: Tuesday, October 1, 2019 1:04 PM
To: Alfred Asterjadhi <aasterja@xxxxxxxxxxxxxxxx>; George Cherian <gcherian@xxxxxxxxxxxxxxxx>; Abhishek Patil <appatil@xxxxxxxxxxxxxxxx>;
Bin Tian <btian@xxxxxxxxxxxxxxxx>; Youhan Kim <youhank@xxxxxxxxxxxxxxxx>;
xiaogang.c.chen@xxxxxxxxx;
laurent.cariou@xxxxxxxxx; po-kai.huang@xxxxxxxxx;
jkneckt@xxxxxxxxx;
matthew.fischer@xxxxxxxxxxxx; hwang@xxxxxxxxxxxxx;
ron.porat@xxxxxxxxxxxx;
hongyuan@xxxxxxxxxxx; liwenchu@xxxxxxxxxxx;
brianh@xxxxxxxxx; Osama Aboul-Magd <oamagd@xxxxxxxxx>; Edward Au <edward.ks.au@xxxxxxxxx>; Yongho Seok <yongho.seok@xxxxxxxxx>;
Menzo Wentink <mwentink@xxxxxxxxxxxxxxxx>;
yzhang@xxxxxxxxxxx;
tianyu_wu3@xxxxxxxxx; Kaiying.lu@xxxxxxxxxxxx;
pmonajem@xxxxxxxxx
Subject: TGax D5.0 ready for review
CAUTION: This email originated from outside of the organization.
Hello All,
Please review D5.0 for accuracy and get back to me by Thu EOD.
The comment spreadsheet with editing notes is here:
https://mentor.ieee.org/802.11/dcn/19/11-19-0292-28-00ax-comments-on-tgax-d4-0.xlsx
Redline will follow…
-Robert
To unsubscribe from the STDS-802-11-TGAX list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAX&A=1
To unsubscribe from the STDS-802-11-TGAX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAX&A=1