[STDS-802-11-TGAY] FYI: "obsolete" DMG OFDM 17/1238r1

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi all,

Graham has prepared a submission (17/1238r1) that lists the page and line numbers he propose to remove in response to our discussion this Wednesday. Please refer to his email below for details, and if possible, provide him your comment.

I will also schedule sometime (either in teleconference or in September interim) so that we can walk through his submission in details.

Regards,
Edward

---------- Forwarded message ----------
From: gsmith <gsmith@xxxxxxxxxxxxxxxxxxx>
Date: Wed, Aug 9, 2017 at 2:57 PM
Subject: Re: [STDS-802-11] "obsolete" DMG OFDM 17/1238r1
To: STDS-802-11@xxxxxxxxxxxxxxxxx

--- This message came from the IEEE 802.11 Working Group Reflector ---

New revision posted with proposed new Figure 20-21 (thanks Edward for fast response). Please use this revision for comments

Thanks

Graham

From: gsmith [mailto:gsmith@WI-FICONSULTING.ORG]
Sent: Wednesday, August 09, 2017 11:52 AM
To: STDS-802-11@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11] "obsolete" DMG OFDM 17/1238

--- This message came from the IEEE 802.11 Working Group Reflector ---

Hi,

Re: DMG OFDM

CID 64 in 11md is a comment to remove DMG OFDM from the Standard. This was discussed today in 11ay and the consensus was to remove it.

Please note that 17/1238r0 has been submitted to Mentor and is the first pass at detailing the removal instructions. Note that the reference is 802.11md D0.1.

This is a request for those skilled in the DMG field to review this document. If you have any comments please send them to me.

In addition would the editors for 11md (Emily and Edward) please look at the instructions for Figure 20-21 at 1658.1 and confirm if they are clear enough. If you need me to alter the figure, would you please send me a Visio version of it.

Thanks

Graham

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.

If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.