Hi John,
Thank you for the suggestion.
I am fine with this version.
Regards,
Abhi
From: ** STDS-802-11-TGbc -- Enhanced Broadcast Service ** <STDS-802-11-TGBC@xxxxxxxxxxxxxxxxx>
On Behalf Of Wullert, John R II
Sent: Monday, January 11, 2021 11:48 AM
To: STDS-802-11-TGBC@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBC] Text on UL use case in clause 4.3.100
CAUTION: This email originated from outside of
the organization.
Folks,
I would suggest a bit of clarification in the second sentence:
"Further, EBCS provides a service in which an EBCS AP can deliver a higher-layer payload received from an EBCS non-AP STA to a destination specified by the STA. The EBCS AP can append additional information to
the payload prior to delivering it to the destination if requested by the STA and supported by the AP."
John
From: ** STDS-802-11-TGbc -- Enhanced Broadcast Service ** <STDS-802-11-TGBC@xxxxxxxxxxxxxxxxx>
On Behalf Of Mark Rison
Sent: Monday, January 11, 2021 2:41 PM
To: STDS-802-11-TGBC@xxxxxxxxxxxxxxxxx
Subject: [EXTERNAL] Re: [STDS-802-11-TGBC] Text on UL use case in clause 4.3.100
Hello Abhi,
Thanks for this.
I think "deliver" is more neutral than "relay".
I think we could avoid the reference to frames.
I think "the contents of the higher layer payload" is waffle.
I suggest something like
"Further, EBCS provides a service in which an EBCS AP can deliver a higher layer payload received from a EBCS non-AP STA to a destination specified by the STA. The EBCS AP can append additional information if requested by the STA and supported by the AP."
Thanks,
Mark
From: ** STDS-802-11-TGbc -- Enhanced Broadcast Service ** <STDS-802-11-TGBC@xxxxxxxxxxxxxxxxx> on behalf of Abhishek
Patil <appatil@xxxxxxxxxxxxxxxx>
Sent: 11 January 2021 18:48
To: STDS-802-11-TGBC@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBC] Text on UL use case in clause 4.3.100
Hi All,
Thank you for the discussion during today’s TGbc session.
With respect to the text related to uplink use case in Morioka-san’s document, I think we could simply the two sentences as follows:.
“Further, EBCS provides a service in which an EBCS AP can relay the contents of the higher layer payload, received from a EBCS non-AP STA, to a destination specified in the frame transmitted
by the STA. The relaying EBCS AP can append additional information if requested by the transmitting STA and supported by the AP.”
I have incorporated the comments I heard during the call – including:
- Using the term relay instead of forwarding
- Tie the actions to an EBCS service
- Refer to the contents of the payload
- Specifically the higher layer payload carried in the frame
- Stayed away from making reference to the actual frame or the field(s) in the frame
Could you please let me know if you have additional suggestions?
Regards,
Abhi
To unsubscribe from the STDS-802-11-TGBC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBC&A=1
|
|
To unsubscribe from the STDS-802-11-TGBC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBC&A=1
To unsubscribe from the STDS-802-11-TGBC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBC&A=1
To unsubscribe from the STDS-802-11-TGBC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBC&A=1