Re: [STDS-802-11-TGBC] PHY type subfield in EBCS ANQP-element

[ANTONIO DE LA OLIVA DELGADO <aoliva@xxxxxxxxxx>]

Hi Hitoshi, thanks a lot.

Please consider the following DCNs related to that when writing the contribution. 

CIDs: 2028, 2027, 2237

Thanks!

El mié, 22 dic 2021 a las 19:51, Hitoshi MORIOKA (<hmorioka@xxxxxxxxxxxx>) escribió:

Hi Stephen and all,

I will make a submission to modify this table.

Best Regards,

2021/12/22 21:03、Stephen McCann <mccann.stephen@xxxxxxxxx>のメール:

Dear all,

               earlier in November I presented CID 2270:

Page

Line

Clause

Comment

Proposed Change

Resolution

50.46

46

9.4.5.1

PHY type and detailed TX parameters may provide additional information, however,not quite sure what value is added to provide this information. Please clarify. If no value is added, suggest to remvoe.

as in comment, suggest to remove all PHY spec related to PHY type, data rate if no value is added.

The comment concerns Table 9-340d. Based on the discussion it was suggested that someone else may produce a submission that also changes this table.

Does anyone know if this has happened or not please? Thanks.

Kind regards

Stephen

---

To unsubscribe from the STDS-802-11-TGBC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBC&A=1

---

To unsubscribe from the STDS-802-11-TGBC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBC&A=1

--

Antonio de la Oliva
Associate Professor
Telematics Department
Universidad Carlos III de Madrid
E-mail: aoliva@xxxxxxxxxx
Phone: +34 91 624 8803
Fax:   +34 91 624 8749

---

To unsubscribe from the STDS-802-11-TGBC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBC&A=1