Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
- 19/1788r1 - Coordinated OFDMA Operation (Yongho Seok, MediaTek)
- Motion text:
Move to add the following to 11be SFD:
Motion #2:
- 19/1358r4 - Multi-link Operation Management (Yongho Seok, MediaTek)
- Motion text:
Move to add the following to 11be SFD:
802.11be defines a directional-based TID-to-link mapping mechanism among the setup links of a multi-link logical device (MLD).
- By default, after the multi-link setup, all TIDs are mapped to all setup links.
- The multi-link setup may include the TID-to-link mapping negotiation.
- TID-to-link mapping can have the same or different link-set for each TID unless a non-AP MLD indicates that it requires to use the same link-set for all TIDs during the multi-link setup phase.
- NOTE: Such indication method by the non-AP MLD is TBD (implicit or explicit).
- The TID-to-link mapping can be updated after multi-link setup through a negotiation, which can be initiated by any MLD.
- Format TBD
- NOTE: When the responding MLD can not accept the update, it can reject the TID-to-link mapping update.
Hi Alfred,I have two motions to run below:11-19/1544r4 - Multi-link power save operation (Minyoung Park, Intel Corporation)Motion #1:Move to add the following text to 11be SFD:
For each of the enabled links, frame exchanges are possible when the corresponding non-AP STA of the enabled link is in the awake state.
NOTE - A link is enabled when that link can be used to exchange frames subject to STA power states.
NOTE - When a link is disabled (i.e. not enabled) by an MLD the frame exchanges are not possible.- Moved by: Minyoung ParkMotion #2:Move to add the following text to 11be SFD:
An AP of an AP MLD may transmit on a link a frame that carries an indication of buffered data for transmission on other link(s)- Moved by: Minyoung ParkRegards,MinyoungOn Wed, Jan 15, 2020 at 11:54 PM Alfred Asterjadhi <asterjadhi@xxxxxxxxx> wrote:Please let me know if you plan to run any motions on SPs that passed the 75% threshold so that we can allocate some time during the Thursday PM1 and PM2 sessions.In order to simplify the process please follow these steps:- Include the motion text in a revised version of the corresponding submission- Send me a copy of the motion text so that i can include it in the agenda slides. The request to be accompanied with the following information:- DCN and Rev - Title of the presentation (Author, Affiliation)- Motion text:- Moved by:Let me know if you have any questions and/or clarifications.Best Regards,Alfred
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1