Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] Call For Motions

Hi Alfred,

I have 3:

 

-11-19-1924-01-00be-multilink – step for using a link (Laurent Cariou, Intel)

-Motion text 1:

Move to add the following text to 11be SFD:

  • At any point in time, a TID shall always be mapped to at least one link that is set up, unless admission control is used

-Moved by Laurent Cariou

 

-Motion text 2:

Move to add the following text to 11be SFD:

  • Management frames are allowed on all enabled links, following baseline

-Moved by Laurent Cariou

 

-Motion text 3:

Move to add the following text to 11be SFD:

  • If a TID is mapped in UL to a set of enabled links for a non-AP MLD, then the non-AP MLD can use any link within this set of enabled links to transmit data frames from that TID
  • If a TID is mapped in DL to a set of enabled links for a non-AP MLD, then:
    • the non-AP MLD can retrieve buffered BUs corresponding to that TID on any links within this set of enabled links
    • The AP MLD can use any link within this set of enabled links to transmit data frames from that TID, subject to existing restrictions for transmissions of frames that apply to those enabled links
      • An example of restriction is if the STA is in doze state

- Moved by Laurent Cariou

 

Thanks

Laurent

 

 

From: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
Sent: Thursday, January 16, 2020 11:10 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] Call For Motions

 

Hi Alfred,

 

I have two more:

-11-20-0029-03-00be-preamble-structure-and-sig-contents

-Motion text 5

Move to add the following text to 11be SFD:

  • The following subfields exist in U-SIG and/or EHT-SIG of an EHT PPDU sent to single user:
    • MCS
    • NSTS
    • GI+EHT-LTF Size
    • Coding

 

-Moved by Ross Jian Yu

 

-Motion text 6

Move to add the following text to 11be SFD:

  • The following subfield exists in U-SIG or EHT-SIG an EHT PPDU sent to multiple user:
    • GI+EHT-LTF Size

 

-Moved by Ross Jian Yu

 

Thanks

 

Ross Jian Yu

Huawei Technologies

发件人: Yujian (Ross Yu)
发送时间: 2020年1月17日 1:42
收件人: 'STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx' <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>
主题: 答复: [STDS-802-11-TGBE] Call For Motions

 

Hi Alfred,

 

I have one more:

-11-19-1914-04-00be-multiple-ru-discussion

-Motion text 4

Move to add the following text to 11be SFD:

For LDPC coding, for combined RUs sent to a user with RU size less than 242-tone, a single tone mapper shall be used.

-Moved by Ross Jian Yu

 

Regards

 

Ross

 

发件人: Yujian (Ross Yu)
发送时间: 2020年1月16日 18:52
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: 答复: [STDS-802-11-TGBE] Call For Motions

 

Hi Alfred,

 

-11-20-0029-02-00be-preamble-structure-and-sig-contents (Ross Jian Yu, Huawei Technologies)

-Motion text 1:

Move to add the following text to 11be SFD:

  • RU Allocation subfield exists in the Common field of the EHT-SIG field of an EHT PPDU sent to multiple users.
    • Compressed modes are TBD
    • Contents of RU allocation subfield are TBD

-Moved by Ross Jian Yu

 

-Motion text 2:

Move to add the following text to 11be SFD:

  • There exists at least one compressed mode in which RU Allocation subfield doesn’t exist in the Common field of the EHT-SIG field of an EHT PPDU sent to multiple users?
    • Signaling method is TBD

-Moved by Ross Jian Yu

 

-Motion text 3:

Move to add the following text to 11be SFD:

  • The following subfields exist in U-SIG of an EHT PPDU sent to multiple user.
    • EHT-SIG MCS
    • Number of EHT-SIG Symbols

-Moved by Ross Jian Yu

 

Thanks

 

Regards

 

Ross Yu

Huawei Technologies Co.,Ltd.

 

发件人: Chen, Cheng [mailto:cheng.chen@xxxxxxxxx]
发送时间: 2020年1月16日 16:34
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBE] Call For Motions

 

Hi Alfred,

 

Minor revision on motion text below to make it as a non-question statement to be included in 11be SFD.

 

-11-19/1931r2 – Multi-AP group formation follow-up (Cheng Chen, Intel Corporation)

-Motion text:

Move to add the following text to 11be SFD:
11be shall define a mechanism to determine whether an AP is part of an AP candidate set and can participate as a shared AP in Coordinated AP transmission initiated by a sharing AP.

- Moved by: Cheng Chen

 

Best,

Cheng

 

From: Chen, Cheng
Sent: Thursday, January 16, 2020 12:23 AM
To: Alfred Asterjadhi <asterjadhi@xxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] Call For Motions

 

Hi Alfred,

 

I have one motion to run as shown below:

 

-11-19/1931r1 – Multi-AP group formation follow-up (Cheng Chen, Intel Corporation)

-Do you agree to define a mechanism to determine whether an AP is part of an AP candidate set and can participate as a shared AP in Coordinated AP transmission initiated by a sharing AP?

- Moved by: Cheng Chen

 

Best,

Cheng

 

From: Alfred Asterjadhi <asterjadhi@xxxxxxxxx>
Sent: Wednesday, January 15, 2020 11:54 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] Call For Motions

 

Please let me know if you plan to run any motions on SPs that passed the 75% threshold so that we can allocate some time during the Thursday PM1 and PM2 sessions. 

 

In order to simplify the process please follow these steps:

- Include the motion text in a revised version of the corresponding submission

- Send me a copy of the motion text so that i can include it in the agenda slides. The request to be accompanied with the following information:

- DCN and Rev - Title of the presentation (Author, Affiliation)

- Motion text:

- Moved by:

 

Let me know if  you have any questions and/or clarifications.

 

Best Regards,

 

Alfred

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1