Hello Abhi
Good, thanks for your response. I also thought about the paragraph you cited, and regarded it as the behavior of receipt. It may be understood as
the behavior of both originator and receipt.
In subclass 10.25.6.8 Maintaining block ack state, it may miss something, it just mentions “ the originator shall maintain block ack state”, and
no other place to further explain what is “block ack state”.
A minor suggestion on your passed sp, could we remove “receive” from “the receive status”? In this way, it could be aligned with the text in the
Spec.
Best wishes
Ming Gan
发件人: Abhishek Patil [mailto:appatil@xxxxxxxxxxxxxxxx]
发送时间: 2020年5月7日
4:08
收件人: Ganming (Ming) <ming.gan@xxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: RE: [STDS-802-11-TGBE] 24r2 MLO: Acknowledgement procedure
Hi Ming,
How are you?
Thank you for your question.
The baseline spec (REVmd) has a few instances which covers the 1st bullet in my SP.
For example in 9.3.1.8.2 (Compressed BA variant), we have the following statement (highlighted below)
Regards,
Abhi
From: Ganming (Ming) <ming.gan@xxxxxxxxxx>
Sent: Monday, May 4, 2020 9:27 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] 24r2 MLO: Acknowledgement procedure
CAUTION: This email
originated from outside of the organization.
Hello Abhi
In REVmd 3.1, it just has the following sentence in subclass 10.25.6.8 Maintaining block ack state at the originator
If the originator receives a BlockAck frame in response to an HT-immediate BlockAckReq frame, it shall, in addition,
— Not update the status of MPDUs with Sequence Number subfield values between WinStartO and SSN
of the received BlockAck frame, and
— Not update the status of MPDUs that have been already positively acknowledged.
Could you point it out which page in the Spec has the similar statement to the first bullet in your SP. Don’t you mean “the originator shall
maintain block ack state” ? I am just curious about it. Thanks for your answer ahead.
Best wishes
Ming Gan
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1