Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] 0358r0: Multi-BSSID Operation with MLO



Hi Guogang,

 

In your example, each link has a single BSS AP. Therefore, how is it related to doc 358 which discusses multiple BSSID feature? I believe this is a separate discussion (and should not be confused with the discussion in doc 358)

 

It would help if you could please provide details on the configuration (SSID, security, BA setup etc) if the MLA framework were to support this.

 

Regards,
Abhi

 

From: huangguogang <huangguogang1@xxxxxxxxxx>
Sent: Friday, May 8, 2020 12:56 AM
To: Abhishek Patil <appatil@xxxxxxxxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject:
答复: 0358r0: Multi-BSSID Operation with MLO

 

CAUTION: This email originated from outside of the organization.

Hi Abhi,

 

For now, I don’t find very useful use case for this configuration. I just want to confirm whether this configuration is supported in the current MLD framework.

 

 

Best wishes

Guogang Huang

 

发件人: Abhishek Patil [mailto:appatil@xxxxxxxxxxxxxxxx]
发送时间: 20205815:31
收件人: huangguogang <huangguogang1@xxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: RE: 0358r0: Multi-BSSID Operation with MLO

 

 

Hi Guogang,

 

Could you please help provide the details on the use case or the problem this configuration would address?

 

Regards,
Abhi

 

From: huangguogang <huangguogang1@xxxxxxxxxx>
Sent: Thursday, May 7, 2020 7:49 PM
To: Abhishek Patil <appatil@xxxxxxxxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: 0358r0: Multi-BSSID Operation with MLO

 

CAUTION: This email originated from outside of the organization.

Hello Abhi,

 

I’m not sure that whether I expressed my question clearly. My question is that: Assuming that MLD 1 is consisted of BSSID-1 and BSSID-2, and MLD 2 is consisted of BSSID-2 and BSSID-3, as shown in the below figure. Whether this case is allowed? In other words, whether the same BSSID can be belonged to different MLDs? If this case is prohibited, can you further explain why.

 

 

Best wishes

Guogang Huang

 


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1