| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hi Bin, It is fine with me since the performance is similar. I can update the SPs accordingly in the next version.
To everyone, Please check if it is ok to change SP2 to: SP2: Do you support the following BCC interleaver parameters for RU132: Note: the parameters are for w/o DCM case
regards 于健 Ross Yu Huawei Technologies 发件人: Bin Tian [mailto:btian@xxxxxxxxxxxxxxxx]
Hi Ross Thank your for deferring the SP on BCC interleaver for aggregated RU (20/773r1). I do have a concern on the Ncol for RU132 (26+106). Normally in spec, Ncol=Nsd/Dtm
so we prefer Ncol=126/6=21. There was some discussion back in 11ac time on this. In P33 2010/1300r0 LDPC for 11ac, it mentions that when Ncol=Nsd/Dtm, LDPC tone mapping becomes a special case of BCC interleaver. Since the performance of Nco=21 and 18 are
almost the same, we want to keep Ncol=Nsd/Dtm for potential implementation benefit.
Thanks, Bin From: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
CAUTION: This email
originated from outside of the organization. Hi Alfred, Tianyu, Sigurd Please add the following contribution to the PHY queue: 20/783r0 -
EHT-SIG Compression Format, Ross Jian Yu (Huawei), Preamble topic. https://mentor.ieee.org/802.11/dcn/20/11-20-0783-00-00be-eht-sig-compression-format.pptx Moreover, I got request to defer the following SPs, I plan to run them
next week to give people sometime to check offline. 11-20-0609-03-00be-further-discussion-on-ru-allocation-subfield-in-eht-sig (Ross Jian Yu (Huawei)), 6 SPs (SP2, SP5, SP6, SP7, SP8, SP9) 11-20-0773-01-00be-bcc-interleaver-parameters-for-multiple-ru (Ross Jian Yu (Huawei)), 4 SPs. Thanks. regards 于健 Ross Yu Huawei Technologies 发件人: Sameer Vermani [mailto:svverman@xxxxxxxxxxxxxxxx]
Hi Alfred, Please also add to the PHY queue, the following submission: 20/778, “MU-MIMO Simplifications for EHT”, Sameer Vermani (Qualcomm) Thanks, Sameer From: Ron Porat <000009a0da80e877-dmarc-request@xxxxxxxxxxxxxxxxx>
CAUTION: This email
originated from outside of the organization. Hi Alfred, Please add to the PHY queue:
Thanks, Ron From: Alfred Asterjadhi [mailto:asterjadhi@xxxxxxxxx]
Hello all, This is a call for submissions for the upcoming teleconference calls meeting. Please let me know if you have any items to be added to the agenda by sending me an e-mail with a request using the format below: - DCN-Presentation Title (Author, Affiliation), Topic Also please ensure that the presentation is uploaded
at least one week prior to the conference call as I will include the links to the presentations in the Submission's list. If the contribution is not uploaded by that time then it may not be included in the list. PS - There is no need to send an additional request for contributions that are already present in the conf call queue as they will be imported by default to the Back-Logged
Submission's List. Best Regards, Alfred -- Alfred Asterjadhi, PhD IEEE802.11 TGbe Chair, Qualcomm Technologies Inc. Cell #: +1 858 263 9445 Office #: +1 858 658 5302 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |