Hi Yunbo,
This straw poll passed in the telecon and there was not much chance to discuss it:
"When AP MLD transmit a BU in one link to a
non-AP MLD, if there is at least one additional buffered BU of any TID or
management frames that is mapped to this link by TID-to-link mapping or default
mapping for the same non-AP MLD, the More Data subfield is set to 1, otherwise
the More Data subfield is set to 0."
- When the bit is set to 1, there is no indication about which link the BU may be transmitted on. Should the receiver MLD stay awake in all links?
- When the bit is set to 0, there may be still BU's outside a common buffer and getting ready for transmission in another link. In this case the receiver should not set the other link to doze based on the 0 value in the first link
Thanks
Pooya
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1