Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] PDT-PHY-Timing-related-parameters



Good point. Depending on discussion outcome, I can update it in the next revision.

Thanks for the review.

Bin

From: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
Sent: Wednesday, July 29, 2020 8:50:01 PM
To: Bin Tian <btian@xxxxxxxxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>
Subject: 答复: [STDS-802-11-TGBE] PDT-PHY-Timing-related-parameters
 

CAUTION: This email originated from outside of the organization.

Hi Bin,

 

Thanks for the work. Very efficient.

 

One general comment is in table 2 for example, CBW160+160 is missing according to the current SFD. Whilst I know Rui is going to discuss this soon.

 

regards

于健 Ross Yu

Huawei Technologies

 

发件人: Bin Tian [mailto:btian@xxxxxxxxxxxxxxxx]
发送时间: 2020730 4:48
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBE] PDT-PHY-Timing-related-parameters

 

Hi TTT members and all

As you know,  Timing related parameter is a single section in PHY that defines the most commonly used variable and parameters which are needed for the drafting of other PHY sections. Traditionally this section has to be drafted first. To save time and be consistent in content,  my colleague Lin Yang and I have taken a stab by porting this section from 11ax D6.0 to the EHT draft and make some necessary changes to reflect the new bandwidth and RU/MRU size introduced in EHT. There are some TBDs which we have highlighted in yellow and can be updated in the future depending on the PHY discussion outcome.  I have uploaded the initial version to the mentor as 11-20/1153r0.  Please take a look and let me know if you have any comments and suggestions.

 

Thanks,

Bin

   

 

 

 

 

 

 

 


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1