| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Allow me to jump in.
If it is a QoS Null frame or a normal data frame, the target AP won’t understand it’s for special purpose, i.e., tentative association.
So, before the (re)association, the AP will discard, it won’t it?
Best regards, tomo From: huangguogang <huangguogang1@xxxxxxxxxx>
Hi Jay Yang, Thanks for your discussion. The specific frame is TBD. It can be QoS Null frame or normal uplink data frame.
It’s target AP.
Regards Guuogang Huang 发件人:
Yang, Zhijie (NSB - CN/Shanghai) [mailto:zhijie.yang@xxxxxxxxxxxxxxx]
Hi Guogang, Could you explain when the specific frame is sent out? Which’s the triggered AP here? Current AP or target AP? Thanks Best Regards Jay Yang From: huangguogang <huangguogang1@xxxxxxxxxx>
Hi all,
I have uploaded a new version of DCN834. Based on the off-line discussion, I prepare to run a high-level straw poll. The text is shown as below. If you have any concern or suggestion,
please let me know.
•
Do you support to define tentative (re)association operation in 11be R2?
–
NOTE. For the tentative (re)association operation, the non-AP MLD needs to proactively send a specific frame to trigger AP sending
DS-STA-NOTIFY.request primitive to the DS, rather than
AP automatically sending
this primitive after successful (re)association.
Regards Guogang Huang To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |