Re: [STDS-802-11-TGBE] PDT PHY - EHT PLME

[Youhan Kim <youhank@xxxxxxxxxxxxxxxx>]

Thank you, Edward.

You are correct.  Fixed in r1.

Regards,

Youhan

 

From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Tuesday, August 25, 2020 7:40 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT PHY - EHT PLME

 

CAUTION: This email originated from outside of the organization.

Hi Youhan,

 

Thanks for your work.

 

May I know if 27.4.2 (PHY MIB) as shown below is actually 33.X1.2 (PHY MIB)?

 

33.X1.1 PLME_SAP sublayer management primitives

Table 33-X1 (EHT PHY MIB attributes) lists the MIB attributes that may be accessed by the PHY entities and the intralayer of higher level LMEs. These attributes are accessed via the PLME-GET, PLME-SET, PLME-RESET, and PLME-CHARACTERISTICS primitives defined in 6.5 (PLME SAP interface).

27.4.2 PHY MIB

 

Thanks and Regards,
Edward

 

On Tue, Aug 25, 2020 at 2:52 AM Youhan Kim <youhank@xxxxxxxxxxxxxxxx> wrote:

Dear EHT PLME TTT members,

 

Initial draft is available at

https://mentor.ieee.org/802.11/dcn/20/11-20-1294-00-00be-pdt-phy-eht-plme.docx

 

Please let me know if you have any comments.  Thank you.

 

Regards,

Youhan

 

 

---

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

 

--

---

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

---

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1