| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hello Laurent, I checked DCN 1255r4 again. Although the sp passed, I found my previous comment was not reflected. I would like to confirm your intention for the following text with red color in
1255r4. Why is Address 1 field always set to broadcast address for ML Probe Request and Probe Response frames? Can we allow individual (unicast) MAC address in Address 1 field in Probe Request/ Response frame? An MLD probe request is a Probe Request frame:
-
with the
Address 1 field set to the broadcast address, the Address 3 field set to the BSSID of an AP, or with the Address 1 field set to the BSSID of an AP, or with the
Address 1 field set to the broadcast address, the Address 3 field set to wildcard BSSID and the SSID field set to the SSID of an AP
-
and that includes a TBD signalling that identifies that the Probe Request frame is an MLD probe request and that identifies which APs of the AP MLD are requested.
An MLD probe request allows a non-AP STA to request an AP to include the complete set of capabilities, parameters and operation elements of other APs affiliated to the same AP MLD as the AP
(Motion related text).
It is TBD how the complete information of an AP affiliated to the same AP MLD as the AP identified in the Address 1 or Address 3 field of the Probe Request frame is requested. The complete information of a requested AP sent by a reporting AP is defined as all elements that would be provided if the requested AP was transmitting the Probe Response frame, except the following elements, if present:
the Reduced Neighbor Report element, the Multiple BSSID element, the ML element, other exceptions TBD. If an AP that is part of an AP MLD receives an MLD Probe Request from a non-AP STA, it
shall respond with an MLD probe response, which is
a Probe Response frame with the Address 1 field set to the broadcast destination address that includes an ML element with a STA profile with complete information for each of the APs that are affiliated to the same AP MLD as the
AP and that are requested by the MLD probe request. Best wishes Ming Gan 发件人: Cariou, Laurent [mailto:laurent.cariou@xxxxxxxxx]
Hi Alfred, Please put 1255 and 1256 in the agenda for SP on spec text for D0.1 for Monday August 31st. Thanks, Laurent From: Alfred Asterjadhi <asterjadhi@xxxxxxxxx>
Hello all, I uploaded an updated version of the agendas, which contains the agenda for the next conference calls, scheduled on Monday, August 31 (MAC/PHY), 19:00-22:00
ET. The agendas can be found here: The dial in details can be found in the IEEE 802.11 calendar in their respective entries. The calendar can be accessed from this webpage. PS 1: Guidelines for scheduled PHY conf calls:
·
Every time the agenda is sent the TG chair will ask if there are any submissions requests to be added to the PHY submissions queue. Requests can be regarding new submissions or regarding submissions with deferred
SPs.
·
Requests may explicitly indicate if the requestor prefers to discuss his/her submission at a particular PHY conf call. If there is no such explicit indication then the submission will be added by default to
the PHY submissions queue and will be scheduled for presentation in a subsequent PHY conference call during which there are at least 3 submissions available for discussion.
·
A scheduled PHY conference call will be cancelled if the planned PHY agenda for that particular conference call does not have queued at least 3 presentations or at least one presentation with an explicit request.
The cancellation notice in this case will be sent at least 24 hours in advance. PS 2: Please send requests for any deferred SPs that need to be
added to the agendas at least 24 hours prior to the start of the conference call (same applies to the upload of submissions present in the agenda and that contains a SP, however in this case no explicit request is needed). Deadline for uploading the initial
version of a submission present in the agenda is 7 days prior to that conference call. Please let me know if you have any questions and/or
suggestions.
Best Regards, Alfred -- Alfred Asterjadhi, PhD IEEE802.11 TGbe Chair, Qualcomm Technologies Inc. Cell #: +1 858 263 9445 Office #: +1 858 658 5302 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |