Re: [STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] PDT-MAC-MLO-TID-link-mappi

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Laurent,

I also have some questions and comments in the attached file.

Best Regards

Yonggang Fang

ZTE (TX)

Original Mail

Sender: Liyunbo <liyunbo@xxxxxxxxxx>

To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>;

Date: 2020/09/02 02:02

Subject: [STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] PDT-MAC-MLO-TID-link-mapping/link management: Default mode and link enablement

Hi Laurent,

I have several question/comments for 1256r3, please check the attachment.

Regards,

Yunbo

发件人: Cariou, Laurent [mailto:laurent.cariou@xxxxxxxxx]
发送时间: 2020年8月26日 2:42
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBE] PDT-MAC-MLO-TID-link-mapping/link management: Default mode and link enablement

I will, sorry for that

From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Tuesday, August 25, 2020 6:12 AM
To: Cariou, Laurent <laurent.cariou@xxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO-TID-link-mapping/link management: Default mode and link enablement

Hello Laurent,

For your figure in 20/1256r0 (Figure xxx – Example of operation of a single radio non-AP MLD with default mapping (all TIDs mapped to all setup links), where the non-AP MLD transitions from operating on link 1 with STA 1 to operating on link 2 with STA 2.), would you attach the source visio file to the document and upload it as revision 1?

Thanks and Regards,
Edward

On Thu, Aug 20, 2020 at 2:33 PM Cariou, Laurent <laurent.cariou@xxxxxxxxx> wrote:

Hi all,
I uploaded draft text proposal for PDT-MAC-MLOTID-link-mapping/link management: Default mode and link enablement

https://mentor.ieee.org/802.11/dcn/20/11-20-1256-00-00be-pdt-mac-mlo-tid-mapping-link-management-default-mode-and-enablement.docx

Please let me know if there are comments.

Thanks,
Laurent

To unsubscribe from the STDS-802-11-TGBE list, click the following link:https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link:https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

Re: [STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] PDT-MAC-MLO-TID-link-mapping/link management: Default mode and link enablement