Re: [STDS-802-11-TGBE] PDT-MAC-MLO-multi-link-setup-usage-and-rules-of-M

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Thanks for pointing it out. Yongho

I see that part “more than one link” is captured in the second paragraph

“The Multi-Link element carried in these frames shall include MLD-level information that is common to all STAs affiliated with the MLD and one or more STA profile subelement(s) including the specific information of the reported STA(s) corresponding to the link(s) according to the following rules.

(Its sub-paragraphs are also mentioning like that)

Do you happen to want it to be more clear by expressing it explicitly (more than one link)?

Thanks

Best Regards

Insun

From: Yongho Seok [mailto:yongho.seok@xxxxxxxxx]
Sent: Tuesday, September 8, 2020 2:09 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO-multi-link-setup-usage-and-rules-of-ML-IE

My concern is that the following part is not clear in the PDT.

802.11be supports that a non-AP MLD may initiate multi-link setup with an AP MLD to setup more than one link with subset of APs affiliated with the AP MLD. This is for R1.

[Motion 122, #SP133, [8] and [129]]

Please let me know which wording is capturing "more than one link". Just including the motion passed text is more clear.

Thanks,

Yongho

2020년 9월 7일 (월) 오후 9:58, 장인선 <insun.jang@xxxxxxx>님이 작성:

Hi Yongho

Thanks a lot for your comments

I have received the same feedback as your comment.
The motion says like “a non-AP MLD can request subset of APs in AP MLD to setup links”
Therefore, to include the meaning of motion in r3, added the following: the reported non-AP STA, which is affiliated with the non-AP MLD, corresponding to the link that is requested for multi-link setup (Likewise, on AP MLD side)

If you have further comments/concerns on that, please let me know.

Thanks
Best Regards
Insun

From: Yongho Seok [mailto:yongho.seok@xxxxxxxxx]
Sent: Tuesday, September 8, 2020 1:34 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO-multi-link-setup-usage-and-rules-of-ML-IE

Hi Insun,
It seems that the following motion is not captured in your PDT. Could you add that sentence?
802.11be supports that a non-AP MLD may initiate multi-link setup with an AP MLD to setup more than one link with subset of APs affiliated with the AP MLD. This is for R1.
[Motion 122, #SP133, [8] and [129]]

Thanks,
Yongho

2020년 8월 28일 (금) 오전 12:53, 장인선 <insun.jang@xxxxxxx>님이 작성:
Dear all TTT members for ML setup: usage and rules of ML IE

Thanks very much for comments
I have uploaded an updated version (r1) based on the comments by some members
https://mentor.ieee.org/802.11/dcn/20/11-20-1300-01-00be-pdt-mac-mlo-multi-link-setup-usage-and-rules-of-ml-ie.docx

Please let me know if you have any further comments/questions on the updated text

Thanks
Best Regards
Insun

From: 장인선 [mailto:insun.jang@xxxxxxx]
Sent: Tuesday, August 25, 2020 5:32 PM
To: 'STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx'
Subject: PDT-MAC-MLO-multi-link-setup-usage-and-rules-of-ML-IE

Dear all TTT members for ML setup: usage and rules of ML IE

I have uploaded an initial version of proposed text for Usage and Rules of ML IE in the context of ML setup
https://mentor.ieee.org/802.11/dcn/20/11-20-1300-00-00be-pdt-mac-mlo-multi-link-setup-usage-and-rules-of-ml-ie.docx

Please let me know if you have any comments/questions on the proposed text

Thanks
Best Regards
Insun
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1