Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi Woobong,
Thanks. On 1) your suggestion is good, let’s keep BW320 TBD for now.
On 3) there are a couple of places in the 11ax spec stating “The … test shall be performed over at least 20 HE PPDUs. The PPDUs under test shall be at least 16 data OFDM symbols long”.
Regards, Ron
From: Wook Bong Lee [mailto:wookbong.lee@xxxxxxxxxxx]
Hi Ron,
Thanks for comments. I have questions on your comments.
Please see inline.
Best regards, Wook Bong Lee From: Ron Porat [mailto:ron.porat@xxxxxxxxxxxx]
Hi Wook bong
A few more comments:
1. LO requirements are copied from 11ax but we have new BW320. Suggest to keep that TBD. [WB] You mean make texts in section xx.3.19.4.2 TBD? Or you want to keep it but want to add text something like “The transmit center frequency leakage for CBW320 PPDU is TBD” 2. Need to rows for 4K QAM [WB] Done. Now I have 4KQAM ¾ and 5/6. 3. Need to add # of frames, # of symbols, # of PPDU for measurements [WB] Can you clarify your comment? Maybe you can point me which text from 11ax is missing in the draft.
Thanks, Ron
From: Wook Bong Lee [mailto:wookbong.lee@xxxxxxxxxxx]
Thanks Yujin. I accepted and uploaded new revision.
Best regards, Wook Bong Lee
From: Yujin Noh [mailto:yujin.noh@xxxxxxxxxxxx]
Hi, Wookbook and MJ
Thank you for sharing and updating the document.
Some modification in the attached. It is very minor, so you may want to apply it when additional updates are implemented.
Regards, Yujin
From: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Hi Youhan,
Thank you for your comment.
MJ made updates based on your comment.
Please take a look at whether you have further comments or not.
It is uploaded to the server as well.
Wook Bong Lee
From: Youhan Kim [mailto:youhank@xxxxxxxxxxxxxxxxx]
Hi, Wookbook and MJ. Thanks for the nice work. Please see my comments attached. For 1253.
Regards, Youhan
From: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
CAUTION: This email originated from outside of the organization. Hi all,
I just uploaded draft text proposal for PDT-PHY- Transmit specification: Clock frequency and modulation accuracy. 11-20/1252r0 PDT-PHY-Frequency Tolerance 11-20/1253r0 PDT-PHY-Modulation Accuracy
Please let us know if you have any comment.
Thanks MJ for your work.
Best regards, Wook Bong Lee
From: Wook Bong Lee
Hello all, This is for PHY- Transmit specification: Clock frequency and modulation accuracy. As you can find in 11ax spec, we have following two sections for this.
There is one motion for these sections, i.e. 802.11be supports -38 dB as the Tx EVM requirement for 802.11be 4096 QAM. [Motion 112, #SP20, [9] and [70]]
I have few things to discuss. For those thing, I am thinking we can make it TBD. Will write a contribution to discuss that.
Other than that, mostly it will be similar to 11ax.
MJ kindly volunteered for writing above sections. He will share draft when it is ready.
If you have any suggestion, please let us know. Best regards, Wook Bong Lee To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature