| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hi Chenchen I double checked with Youhan and the rule should be as in the new figure. i.e. we don’t need the initialization branch which is only for non-HT dup BW indication. Also I checked
I.1.5.2 Scrambling the BCC example
in 11md draft. You can see the first 7 bits after scrambling is
not “1011101”
which is used to initialize the scrambler. If the initialization branch always exist, the first 7 bits after scrambling should be “1011101”. BRs, Xiaogang. From: liuchenchen <liuchenchen1@xxxxxxxxxx>
Hi Xiaogang Thanks for your comments. All your comments are accepted except the modification to the figure. The initialization is always needed I think. We can talk more
on that if needed. BRs Chenchen Liu 发件人: Chen, Xiaogang
C [mailto:xiaogang.c.chen@xxxxxxxxx]
Hi Chenchen, I added more comments on top of Lin’s. Thanks. BRs, Xiaogang. From: Lin Yang <linyang@xxxxxxxxxxxxxxxx>
Thanks Chenchen for drafting the scrambler section. Please find my comments in the attached file.
Thanks, Lin From: liuchenchen <liuchenchen1@xxxxxxxxxx>
Dear TTT members and all. The PDT draft on EHT PHY data scrambler and EHT LTF sequences has been uploaded. Please check it out and share your comments so as to make it better. https://mentor.ieee.org/802.11/dcn/20/11-20-1495-00-00be-pdt-of-eht-ltf-sequences.docx Thank you Best regards Chenchen To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |