Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] PDT of EHT PHY DATA scrambler and descrambler



Hi Ron

 

Thank you all for your comments. The PDT for DATA scrambler and descrambler is updated to r3

 

BRs

Chenchen Liu

 

发件人: Ron Porat [mailto:ron.porat@xxxxxxxxxxxx]
发送时间: 2020923 9:28
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx; liuchenchen <liuchenchen1@xxxxxxxxxx>
主题: RE: [STDS-802-11-TGBE] PDT of EHT PHY DATA scrambler and descrambler

 

Hi Chenchen,

 

A few more comments:  

 

The SERVICE field of EHT PPDU: propose to specifically say “EHT DATA field, ….” Since so far everything else had same scrambler and to avoid confusion.

when the all 1s initial state is used”  - propose to revise to “when the all 1s initial state, set by the 11 initialization bits as shown in figure 34-x, is used

the 7 LSB bits of the SERVICE field shoud not be set to all zeros”  - propose “the first 7 initialization bits as shown in Figure 34-x, equivalent to the 7 LSB bits of the SERVICE field after scrambling, should not be set to all zeros

Thanks,

Ron

 


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1