Good point, Bo.
We could add the following to the PDT. Another option is to handle it within your PHY PDT for a cohesive design. Please let me know which way works better for you.
34.x.2 TXVECTOR and RXVECTOR
Table 34-1 TXVEROR and RXVECTOR Parameters
|
Parameter |
Condition |
Value |
TXVECTOR |
RXVECTOR |
|
INACTIVE_SUBCHANNELS |
FORMAT is NON_HT and NON_HT_MODULATION is equal to NON_HT_DUP_ OFDM |
TBD |
|
|
Thank you,
Yanjun
From: sun.bo1@xxxxxxxxxx <sun.bo1@xxxxxxxxxx>
Sent: Wednesday, September 23, 2020 6:34 PM
To: Yanjun Sun <yanjuns@xxxxxxxxxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx; yongho.seok@xxxxxxxxx; Xiaofei.Wang@xxxxxxxxxxxxxxxx
Subject: Re:PDT-MAC-TXOP-Preamble-Puncturing
CAUTION: This email originated from outside of
the organization.
Hello, Yanjun,
Thanks for initiaing the discussion.
For your reference, the current 11ax TXVECTOR parameter INACTIVE_SUBCHANNELS is present and indicates the 20 MHz subchannels that are punctured when "FORMAT
is NON_HT and NON_HT_MODULATION is NON_HT_DUP_OFDM".
In 11be, Table 34-1 will contain parameter INACTIVE_SUBCHANNELS as well to extend support for FORMAT=EHT_MU. But for NON_HT case, the use of this parameter may refer to the definition as
in 11ax Table 27-1. My question is whether current definition for INACTIVE_SUBCHANNELS in Table 27-1 supports the description in your proposal?
Best Regards,
Bo
Original Mail
Sender: YanjunSun <yanjuns@xxxxxxxxxxxxxxxx>
CC: Yongho Seok <yongho.seok@xxxxxxxxx>;Xiaofei.Wang@xxxxxxxxxxxxxxxx
<Xiaofei.Wang@xxxxxxxxxxxxxxxx>;sun bo10013985;
Date: 2020/09/24 09:02
Subject: RE: PDT-MAC-TXOP-Preamble-Puncturing
Hi All,
Thank you for your inputs today. Please see the revised draft at:https://mentor.ieee.org/802.11/dcn/20/11-20-1408-01-00be-pdt-mac-txop-preamble-puncturing.docx
Yongho, Bo, the draft has been revised to refer to the
INACTIVE_SUBCHANNELS defined in 1403. Thanks again for your inputs.
Please let me know if you have any questions/comments.
Thank you,
Yanjun
From: Yanjun Sun <yanjuns@xxxxxxxxxxxxxxxx>
Sent: Tuesday, September 15, 2020 10:29 AM
To:
STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] PDT-MAC-TXOP-Preamble-Puncturing
CAUTION: This email originated from outside of
the organization.
Hi all,
If you have any comments on the following clause for TXOP with preamble puncturing, please let me know.
https://mentor.ieee.org/802.11/dcn/20/11-20-1408-00-00be-pdt-mac-txop-preamble-puncturing.docx
Thanks for the folks who has provided early feedbacks.
Thank you,
Yanjun
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1