Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi Chenchen, Thanks for your effort. I have a comment. In following, you have NSTS for single user transmission. In an EHT MU PPDU with a single RU/MRU (the RU/MRU having an MU-MIMO allocation or an SU allocation), the number of EHT-LTF symbols,
NEHT-LTF, is a function of the total number of space-time streams NSTS as shown in Table TBD. But we determined not to differentiate single user and multi user, please refer 11-20/1153r3 where there is no NSTS but only NSTS,r,total. So, probably you can delete it and modify below sentence as follows. In an EHT MU PPDU, NEHT-LTF is indicated in the U-SIG field. In an EHT MU PPDU
Similarly,
In an EHT TB PPDU, NEHT-LTF is indicated in the Trigger frame that triggers the transmission of the PPDU.
Best regards, Wook Bong Lee From: liuchenchen [mailto:liuchenchen1@xxxxxxxxxx]
Hi Xiaogang I am now ok with your comments. But if I remove the switch in the figure, other people may have some concerns. So how about we just
mark the figure of the scrambler to yellow? Thanks BRs Chenchen Liu 发件人:
Chen, Xiaogang C [mailto:xiaogang.c.chen@xxxxxxxxx]
I mean the last page of the slides is not correct. The rest are correct. BRs, Xiaogang. From: Chen, Xiaogang C <xiaogang.c.chen@xxxxxxxxx>
Sorry Chenchen, please ignore the last slide. The sequence I typed is not the correct one. BRs, Xiaogang. From: Chen, Xiaogang C <xiaogang.c.chen@xxxxxxxxx>
Hi Chenchen I use the attached slides to explain why I proposed the new figure which is not in r3. I can explain in the call if still not clear. Another comment is why the first 7 bits in MU-RTS “should not” be all 0 instead of “shall not” be all 0? BRs, Xiaogang. From: liuchenchen <liuchenchen1@xxxxxxxxxx>
Hi Rui Thank for your comments. The PDT has been updated to r3. BRS Chenchen Liu 发件人:
Rui Cao [mailto:rui.cao_2@xxxxxxx] Hi Chenchen, Thank you for the PDT.
One quick comments: please highlight the three paragraphs in page 9 describing LTF sequences for “80+80” in the document for further discussions. Thank you, Rui From: liuchenchen <liuchenchen1@xxxxxxxxxx>
Hi Lei All your comments are accepted except the last one. I know the text can be simplified, but I think it is better to keep it the same
text with the passed motions. Thanks a lot Best Regards Chenchen Liu 发件人:
Lei Huang [mailto:nusleihuang@xxxxxxxxxxx]
Hi Chenchen, Thank you for preparing this PDT. Attached please find my comments. Best regards, Lei From: liuchenchen <liuchenchen1@xxxxxxxxxx>
Hi Jinyoung Thanks. It has been updated according to your comments. https://mentor.ieee.org/802.11/dcn/20/11-20-1495-01-00be-pdt-of-eht-ltf-sequences.docx Best regards Chenchen Liu 发件人:
천진영 [mailto:jiny.chun@xxxxxxx]
Hi Chenchen, Thank you for preparing the PDT drafts. I’ve added some comments in EHT-LTF draft. Please see the attached. Best regards, Jinyoung From: liuchenchen [mailto:liuchenchen1@xxxxxxxxxx]
Dear TTT members and all. The PDT draft on EHT PHY data scrambler and EHT LTF sequences has been uploaded. Please check it out and share your comments so as
to make it better. https://mentor.ieee.org/802.11/dcn/20/11-20-1495-00-00be-pdt-of-eht-ltf-sequences.docx Thank you Best regards Chenchen To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |