Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi Alfred,
I know that. Thanks for pointing it out.
Please refer attached e-mail for detail discussion.
Last Monday (before it is discussed in MAC ad-hoc) I requested to discuss it in joint or PHY as it is related to PHY via e-mail reflector.
And Matt said (during MAC call on last Wed) we can discuss during motion time.
That is why I request to have a discussion time during motion.
If you prefer MAC ad-hoc time, then can you please put it as a first agenda for today’s call or assign a specific time except 5-6pm?
I also need to attend PHY ad-hoc and have some schedule…
Best regards,
Wook Bong Lee
From: Alfred Asterjadhi [mailto:asterjadhi@xxxxxxxxx]
Sent: Monday, September 28, 2020 9:08 AM
To: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx; Matthew Fischer <matthew.fischer@xxxxxxxxxxxx>; Das, Dibakar <dibakar.das@xxxxxxxxx>; Sharan Naribole <n.sharan@xxxxxxxxxxx>; Srinivas Kandala <srini.k1@xxxxxxxxxxx>; Edward Au <edward.ks.au@xxxxxxxxx>
Subject: Re: [STDS-802-11-TGBE] Call For Review: Provide feedback to pending MAC PDTs via the IEEE reflector
Hello Wook Bong,
According to the minutes this document was presented on September 23rd and passed SP (29Y, 7N, 53A), and is as of now part of the preparatory D0.1 that Edward is working on.
If there is anything that needs further clarification please check with the POC of the document, and if anything needs some more clarifications we can add it for discussion to today's MAC agenda (if time permits).
Regards,
Alfred
On Fri, Sep 25, 2020 at 9:34 AM Wook Bong Lee <wookbong.lee@xxxxxxxxxxx> wrote:
Hi Alfred, Edward, Matt and Dibakar,
I would like to make TBD for following texts in 11-20/1395r12 for D0.1.
An MLD which has a pair of links for which the transmission by the STA of the MLD on one of the links of a PPDU using the maximum allowed transmission power on the primary 20 MHz channel of the BSS using any PPDU bandwidth permitted within the BSS that the STA is capable of transmitting causes the inability of the STA of the MLD on the other link to meet the minimum receive sensitivity requirement defined in 34.w.x.y (Receiver minimum input sensitivity) shall indicate the pair of links as NSTR by setting the TBD field in the TBD elements that it transmits.
There is ongoing discussion in e-mail reflector on this issue.
We can have separate motion for this if necessary during joint call on Sept 30.
Best regards,
Wook Bong Lee
From: Alfred Asterjadhi [mailto:asterjadhi@xxxxxxxxx]
Sent: Friday, September 25, 2020 9:15 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] Call For Review: Provide feedback to pending MAC PDTs via the IEEE reflector
Hello all,
TGbe MAC Ad-hoc has the following PDT documents queued and pending SPs for Monday Conf Call:
o 1440r4 MLO enhanced multi-link operation mode Young Hoon Kwon[SP]
o 1445r3 MLO-Setup-Security Duncan Ho [SP]
o 1411r3 Group addressed data delivery Kaiying Lu [SP]
o 1431r3 MLO-TID mapping/Link management: Individual addressed data delivery without BA negotiation Po-Kai Huang [SP]
o 1320r7 Multi-link-channel-access-capability-signaling Yunbo Li [SP]
o 1274r7 ML-IE-Structure Abhishek Patil [SP]
o 1332r4 MLO BSS parameter update Ming Gan [SP]
o 1407r9 Soft-AP-MLD-Operation Kaiying Lu [SP]
o 1434r4 NS/EP Priority Access Subir Das [SP]
o Re-SP (addl. clarifications): 1255r5
Please review these documents and provide feedback to the POCs (if any) via the reflector so that during the conf call we can reduce the discussion time and simply focus on running the SP and finalize these documents so that they can be included in the candidate D0.1 that we plan to motion on Wednesday Sept 30.
Best Regards,
Alfred
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
--
Alfred Asterjadhi, PhD
IEEE802.11 TGbe Chair,
Qualcomm Technologies Inc.
Cell #: +1 858 263 9445
Office #: +1 858 658 5302
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1