Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] 20/1395r14

Hi Tomo and Matt

For each amendment,  there is a clearly defined set of requirements/specifications for receiver and transmitter. 11be receiver requirements in clause 34 is still under development.  As an example, 11ax receiver requirements (clause 27.3.20) include receiver minimum sensitivity, adjacent channel rejection, max signal input level and CCA sensitivities, etc.

 

I am open to have a discussion in the future on relaxation or special treatment on the requirements of receiver in STR case.  We can summarize the discussion outcome in the receiver specification in clause 34 in the future.

 

Thanks,

Bin

 

From: Matthew Fischer <00000959766b2ff5-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Monday, September 28, 2020 7:19:47 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>
Subject: Re: [STDS-802-11-TGBE] 20/1395r14

 


I cannot clarify what the requirements are in clause 34.

 

One would have to look into the SFD and compendium, but the main one is what was named explicitly in r12, that is, the receiver minimum sensitivity requirement.

 

Bin Tian might provide more clarity.

 

 

Matthew Fischer

Nice Guy

Broadcom Inc.

+1 408 543 3370 office

 

 

On Mon, Sep 28, 2020 at 7:10 PM Tomo Adachi <tomo.adachi@xxxxxxxxxxxxx> wrote:

 

Hi Matt,

 

“An MLD may indicate a pair of links as STR by setting the TBD field in the TBD elements that it transmits if the receiver requirements specified in clause 34 on one link are met whenever it is transmitting on the other link.”

 

Could you clarify what are specified as requirements in clause 34?

Maybe you can point out the related PDT whose SP has passed in the PHY group.

Thanks.

 

Best regards,

tomo

 

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1