| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Thanks much Ross and Edward.
Edward, is that something you will fix yourself in the next edit or it requires a CR?
Thanks,
Ron
From: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
Sent: Tuesday, September 29, 2020 6:44 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] PDT-PHY-EHT-preamble-EHT-SIG
Hi Edward,
That’s also ok for me. It is a minor typo, we can fix it in next version. Thanks.
regards
于健 Ross Jian Yu
Huawei Technologies
发件人: Edward Au [mailto:edward.ks.au@xxxxxxxxx]
发送时间: 2020年9月30日 9:37
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBE] PDT-PHY-EHT-preamble-EHT-SIG
Hi Ross,
Acknowledged with thanks. If possible, I would suggest to fix it after D0.1 as I have just completed the edit.
Regards,
Edward
On Tue., Sep. 29, 2020, 20:53 Yujian (Ross Yu), <ross.yujian@xxxxxxxxxx> wrote:
Hi Ron,
Good catch. I have uploaded r8.
https://mentor.ieee.org/802.11/dcn/20/11-20-1276-08-00be-pdt-phy-eht-preamble-eht-sig.docx
Hi Alfred, Edward,
It would be good you can use r8 instead of r7 in the motion. The only difference is corrected the index typo as Ron pointed below.
regards
于健 Ross Jian Yu
Huawei Technologies
发件人: Ron Porat [mailto:000009a0da80e877-dmarc-request@xxxxxxxxxxxxxxxxx]
发送时间: 2020年9月30日 3:54
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBE] PDT-PHY-EHT-preamble-EHT-SIG
Hi Ross, all
We think 20/1276r7 contains an error in the spatial config map (for the 7 user):
101101
3
3
3
2
2
2
1
16
101110-101111
2-4
2
2
2
2
2
2
14-16
110000
3
3
2
2
2
2
2
16
Should be :
101110-110000
110001
Thanks,
Ron
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1