Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] PDT-PHY-EHT-preamble-EHT-SIG



Sure, I will do it. Thanks and happy golden week w/o 11be calls. 

--------------------------------------------------
regards
于健 Ross Yu
Sent from Great Huawei Mate 20X

发件人:Alfred Asterjadhi <asterjadhi@xxxxxxxxx>
收件人:STDS-802-11-TGBE <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>
时 间:2020-10-01 06:26:41
主 题:Re: [STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] PDT-PHY-EHT-preamble-EHT-SIG

Hi Ron, Ross, and all,

My interpretation is that this is a technical change (albeit pretty straightforward) since it modifies the interpretation of certain values of that particular field. Hence, to be on the safe side I would suggest that we address it with a contribution that is presented in the PHY ad-hoc and incorporated subsequently by our editor following the usual procedures we have set in place.


Best Regards,

Alfred

On Tue, Sep 29, 2020 at 7:56 PM Ron Porat <000009a0da80e877-dmarc-request@xxxxxxxxxxxxxxxxx> wrote:

Thanks much Ross and Edward.

 

Edward, is that something you will fix yourself in the next edit or it requires a CR?

 

Thanks,

Ron

 

 

 

From: Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>
Sent: Tuesday, September 29, 2020 6:44 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE]
答复: [STDS-802-11-TGBE] PDT-PHY-EHT-preamble-EHT-SIG

 

Hi Edward,

 

That’s also ok for me. It is a minor typo, we can fix it in next version. Thanks.

 

regards

于健 Ross Jian Yu

Huawei Technologies

 

发件人: Edward Au [mailto:edward.ks.au@xxxxxxxxx]
发送时间: 2020930 9:37
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBE] PDT-PHY-EHT-preamble-EHT-SIG

 

Hi Ross,

 

Acknowledged with thanks.  If possible, I would suggest to fix it after D0.1 as I have just completed the edit.

 

Regards,

Edward

 

 

On Tue., Sep. 29, 2020, 20:53 Yujian (Ross Yu), <ross.yujian@xxxxxxxxxx> wrote:

Hi Ron,

 

Good catch. I have uploaded r8.

 

https://mentor.ieee.org/802.11/dcn/20/11-20-1276-08-00be-pdt-phy-eht-preamble-eht-sig.docx

 

Hi Alfred, Edward,

 

It would be good you can use r8 instead of r7 in the motion. The only difference is corrected the index typo as Ron pointed below.

 

 

regards

于健 Ross Jian Yu

Huawei Technologies

 

发件人: Ron Porat [mailto:000009a0da80e877-dmarc-request@xxxxxxxxxxxxxxxxx]
发送时间: 2020930 3:54
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBE] PDT-PHY-EHT-preamble-EHT-SIG

 

Hi Ross, all

 

We think 20/1276r7 contains an error in the spatial config map (for the 7 user):

 

101101

3

3

3

2

2

2

1

 

16

101110-101111

2-4

2

2

2

2

2

2

 

14-16

110000

3

3

2

2

2

2

2

 

16

 

Should be :

101110-110000

110001

 

Thanks,
Ron

 


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1



--
Alfred Asterjadhi, PhD
IEEE802.11 TGbe Chair,
Qualcomm Technologies Inc.
Cell #:    +1 858 263 9445
Office #: +1 858 658 5302

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1