Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] PDT on soft AP MLO



Hi all,

Thanks again for sharing your comments during today’s call.

I updated the PDT text based on some comments and offline discussion. Please review it.

https://mentor.ieee.org/802.11/dcn/20/11-20-1407-17-00be-pdt-mac-mlo-soft-ap-mld-operation.docx

In the meanwhile, let me try to clarify further about the intention of this PDT.

The text is to provide general restrictions to a soft AP MLD regarding the capabilities which can be used to differentiate a soft AP MLD from a regular AP MLD. The details about soft AP MLD features will be further discussed and covered during comment resolution.

And also define that one primary link is designated for the NSTR link pair to transmit Beacon/Probe response. Since there is at most one NSTR link pair supported in soft AP MLD, there would be at most one primary link. A non-AP STA/MLD can associate with the soft AP(MLD) through the primary link. Details will be further discussed and covered during comment resolution.

For channel access, the basic principle is to reuse the “sync start time procedure” with only one additional restriction on non-primary link so that an MLD may transmit on the non-primary link only together with primary link. Details will be further discussed and covered during comment resolution.

If you have further comments, please let me know.

Thanks in advance for your support!

Kaiying

 

 

From: Kaiying Lu
Sent: Wednesday, March 17, 2021 10:51 AM
To: 'Nancy Lee'; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: PDT on soft AP MLO

 

Hi Nancy,

 

Thanks very much for your comments.

 

I am fine with your suggestion to separate the two cases and the proposed wording.

 

Best regards,

Kaiying

 

From: Nancy Lee [mailto:000013df95aa5f4e-dmarc-request@xxxxxxxxxxxxxxxxx]
Sent: Wednesday, March 17, 2021 9:13 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] [PDT] Feedback Requested for PDT on TID-to-Link Mapping Negotiation

 

Signify Classified - Internal

 

Hi Kaiying,

 

I have a couple of editorial comments on 11/1407r16 that you presented on today’s call. The following bullet item is difficult to parse:

 

      A STA affiliated to the non-AP or an AP affiliated to the soft AP MLD may initiate a PPDU transmission to its associated soft AP or non-AP STA in the non-primary link only if the STA or AP affiliated to the same MLD in the primary link is also initiating the PPDU as a TXOP holder with the same start time.

One way to clarify would be to insert the word “respectively” before “in the non-primary link”. Even better would be to separate the two cases, i.e.,:

 

      A STA affiliated to the non-AP may initiate a PPDU transmission to its associated soft AP in the non-primary link only if the STA affiliated to the same MLD in the primary link is also initiating the PPDU as a TXOP holder with the same start time.

      An AP affiliated to the soft AP MLD may initiate a PPDU transmission to its associated non-AP STA in the non-primary link only if the AP affiliated to the same MLD in the primary link is also initiating the PPDU as a TXOP holder with the same start time.

 

Also since there are two different constraints listed, I think the preceding sentence should be:

 

STAs affiliated to a non-AP MLD that is associated with a soft AP MLD and APs affiliated to a soft AP MLD shall follow the procedure defined in 35.3.13.6 “Start time sync PPDUs medium access” when intending to transmit in the non-primary link with the following additional constraints.

 

Regards,

Nancy Lee

Signify

 

From: Kaiying Lu <Kaiying.Lu@xxxxxxxxxxxx>
Sent: Tuesday, March 2, 2021 3:21 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] [PDT] Feedback Requested for PDT on TID-to-Link Mapping Negotiation

 

CAUTION: This email is from outside the organization. Do not click on links or open attachments unless you trust the sender.

 

Hello all, 

 

Please let me know if you have any comments or feedback. 

 

Thanks, 

Kaiying


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1