Hi Alice and all,
I have got same question as Eunsung. I understand Alice copied from 11ax. Whilst it seems unclear for 11ax spec itself.
regards
于健 Ross Jian Yu
Huawei Technologies
发件人: Eunsung Park [mailto:esung.park@xxxxxxx]
发送时间: 2021年4月6日
7:11
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBE] TGbe Teleconferences [03/22/2021 and 03/24/2021]: Agendas Posted
Hi Alice,
If we consider the case where 20 MHz and 80 MHz operating STAs participate in 80 MHz TB
PPDU transmission, 20 MHz operating STA has SR1=SR2 whereas 80 MHz operating STA has SR1=!SR2. Is it correct? If so, it can cause different U-SIG content in the 80 MHz TB PPDU. I’m
not sure why we need to set SR1=SR2 for 20 MHz operating STAs in a wider bandwidth transmission.
Best regards,
Eunsung
From: Alice Jialing
Li [mailto:jialing.li.phd2@xxxxxxxxx]
Sent: Tuesday, April 6, 2021 4:30 AM
To: Eunsung Park <esung.park@xxxxxxx>
Cc: TGBE <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>;
hg.cho@xxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe Teleconferences [03/22/2021 and 03/24/2021]: Agendas Posted
Hi Eunsung,
Yes. You are correct. We got the exact wording from the SR fields in HE-SIG-A in HE TB PPDU. And that was the way how it was being set back in 11ax, if we're correct.
Best regards,
Alice
On Sun, Apr 4, 2021 at 11:09 PM Eunsung Park <esung.park@xxxxxxx> wrote:
Hi Alice,
Thanks for preparing the resolutions.
I have a question for clarification. Regarding the resolutions for CID 1618 and 2634, you added the sentences in orange into the Spatial Reuse 2 field as below. Could you clarify what the sentence “If the STA operating channel width is 20 MHz or 40 MHz ~” means? That means a 20 or 40 MHz operating STA sets the Spatial Reuse 2 field to the same value as the Spatial Reuse 1 field?
Best regards,
Eunsung
From: Alice Jialing Li [mailto:jialing.li.phd2@xxxxxxxxx]
Sent: Tuesday, March 23, 2021 3:23 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe Teleconferences [03/22/2021 and 03/24/2021]: Agendas Posted
Hi Alfred,
Please add the comment resolutions on U-SIG part 4 (495r0) to the PHY queue.
Thanks,
Alice Chen
Qualcomm
On Sun, Mar 21, 2021 at 8:37 AM Alfred Asterjadhi <asterjadhi@xxxxxxxxx> wrote:
Hello all,
I uploaded an updated version of the agendas, which contains the agenda for the next conference calls, scheduled on Monday, March 22 (MAC/PHY), 19:00-22:00 ET and Wednesday, March 24 (JOINT), 10:00-12:00 ET.
The agendas can be found here:
https://mentor.ieee.org/802.11/dcn/21/11-21-0385-10-00be-mar-may-tgbe-teleconference-agenda.docx
DIAL IN DETAILS FOR MONDAY:
Join the MAC meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=m6588021783b62d8dfcc451903289a807 Meeting number: 129 109 6603 Meeting password: wireless (94735377 from phones and video systems)
Join the PHY meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=m794621bdef04d9f8fce0b8c9414b2294
Meeting number: 129 370 8473 Meeting password: wireless (94735377 from phones and video systems)
DIAL IN DETAILS FOR WEDNESDAY:
Join the JOINT meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=mf0eb017f253cac532618a3fa59b1344c
Meeting number: 129 921 8124 Meeting password: wireless (94735377 from phones and video systems)
Notice: Please note that by now all authors of the submissions for PDTs and CRs (especially MAC) should have sent requests for feedback to the IEEE TGbe reflector. Members are invited to provide feedback for these contributions prior to the conference call via e-mail so that the time in the conf calls is used efficiently.
Best Regards,
Alfred
--
Alfred Asterjadhi, PhD
IEEE802.11 TGbe Chair,
Qualcomm Technologies Inc.
Cell #: +1 858 263 9445
Office #: +1 858 658 5302
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1