Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi Kumail,
Thanks so much for sharing the document.
For the peer-to-peer part, some clarification would be helpful. Current text seems to be open for interpretation. For instance, when you say once peer-to-peer
bit is set to 1, it would mean that AP ‘allows’ the rTWT schedule for peer-to-peer communication. A few cases can happen here— 1.
Interpretation 1: The same rTWT schedule is used for both UL/DL communication and peer-to-peer communication.
-
Now, there is some control for UL/DL communication through TID (latency-sensitive) negotiation using existing spec. But the concern is that there is
no such control for peer-to-peer communication. When you mix UL/DL and peer-to-peer for the same schedule, the peer-to-peer STAs can transmit any kind of traffic (latency-tolerant) while the STAs involved in UL/DL transmission are latency-sensitive traffic-only
within the same rTWT SP, which is not fair for the latter group of STAs, right?
-
Some other questions—
o
How to do the setup for peer-to-peer? Does only one of the peer-to-peer STAs need to establish rTWT membership with the associated rTWT scheduling
AP or both peer-to-peer STAs need to establish rTWT membership in order to utilize the rTWT schedule for peer-to-peer communication? 2.
Interpretation 2: Separate rTWT schedules are used for UL/DL transmission and for peer-to-peer transmission
-
How to control the TIDs so that only latency sensitive TIDs are allowed for transmission over the peer-to-peer link? If you could clarify overall peer-to-peer operation, that would be great.
Best Rubayet From: Muhammad Kumail Haider <kumail.ieee@xxxxxxxxx>
Hello all, I have updated 11-21/1224 CC 36 CR for Restricted TWT Setup to Rev.4 based on feedback from the group and offline discussions.
Please let me know if there are any further comments/questions. Best regards, Kumail To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |