| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hi Mike, Thank you for reviewing the documents and providing your feedback. Regarding the point you raised, it is a good one. I did think about it. However, even though the non-AP may not support both EMLSR and EMLMR modes simultaneously, the AP can. So, we need two bits for the AP. As a result, if we are to indicate
the support for EMLSR/EMLMR through a single bit for a non-AP, the encoding will be different for AP and non-AP, which might be an unnecessary optimization.
Furthermore, encoding using a single ‘EML Mode’ subfield might be a little counter-intuitive in my opinion. If the bit is set to 0, typically it would mean EML Mode is not supported, which is not the intention here. Thus, I believe the current encoding is appropriate even though an additional bit is used. We could definitely work toward providing further clarifications in the text so that there are no confusions.
Kindly let me know your thoughts. Thanks, Gaurang From: LORGEOUX Mickael <Mickael.Lorgeoux@xxxxxxxxxxxx>
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros. Hi Gaurang, Thanks for sharing us these 2 documents. Regarding the document 1703r0, I have the following remark: The resolution of the CID#7578 clarifies that a non-AP MLD cannot support both EMLSR mode and EMLMR mode simultaneously in the EML capabilities subfield. This being clarified, it seems that having both EMLSR mode and EMLMR mode bits in the EML control field is not necessary and may be even confusing. Indeed, having only one bit, called for example EML mode, in the EML control field is sufficient
to activate either the EMLSR mode (if EMLSR support bit is set to 1) or the EMLMR mode (if the EMLMR support bit is set to 1) on a non-AP MLD. Please let me know if my understanding is correct or not. Best regards Mike From: Gaurang Naik <gnaik@xxxxxxxxxxxxxxxx>
Hi all, I have uploaded r0 of documents
1702 and
1703 on the server. Please let me know if you have any feedback. Thanks, Gaurang From: Gaurang Naik <gnaik@xxxxxxxxxxxxxxxx>
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros. Hi Alfred, Could you please add the following two documents to the MAC queue? I will upload the docs soon.
Thanks, Gaurang From: Cariou, Laurent <laurent.cariou@xxxxxxxxx>
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros. Hi Alfred, Please add doc 1562 in the queue for MAC call. Thanks, Laurent From: Alfred Asterjadhi <asterjadhi@xxxxxxxxx>
Hello all, I uploaded an updated version of the agendas, which contains the agenda for the next conference calls, scheduled on Monday
October 18 (MAC/PHY), 19:00-21:00 ET, Wednesday October 20 (MAC), 10:00-12:00 ET and Thursday October 21 (MAC), 10:00-12:00 ET. PS: Please note the conversion of the conf call of Wednesday from Joint to MAC ad-hoc. The agendas can be found here: https://mentor.ieee.org/802.11/dcn/21/11-21-1478-17-00be-sept-nov-tgbe-teleconference-agenda.docx Note for CR documents: Please update the baseline to TGbe D1.2 (available in the member's area) for the CR documents. Alternatively, please ensure that
there are no conflicts between the proposed changes in the CR documents and TGbe D1.2. DIAL IN DETAILS FOR MONDAY: Join the MAC meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=mf773d5c9fe8b57eec87e24486f11bc95 Meeting number: 233 331 82254 Meeting password: wireless (94735377 from phones and video systems) Join the PHY meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=m1f986061bfb36f8dcd2e4a81efc5ae27 Meeting number: 234 412 17121 Meeting password: wireless (94735377 from phones and video systems) DIAL IN DETAILS FOR WEDNESDAY: Join the MAC meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=mb4461315b1f40e2d01f609734002daca Meeting number: 233 711 92740 Meeting password: wireless (94735377 from phones and video systems) DIAL IN DETAILS FOR THURSDAY: Join the MAC meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=md0721629ef4c19c3dfb03868d0e1a162 Meeting number: 233 029 16155 Meeting password: wireless (94735377 from phones and video systems) Let me know if you have any questions and/or suggestions. Best Regards, Alfred -- Alfred Asterjadhi, PhD IEEE802.11 TGbe Chair, Qualcomm Technologies Inc. Cell #: +1 858 263 9445 Office #: +1 858 658 5302 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 --------------------------------------------------------------------- This e-mail and any attachments may contain confidential material for To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |