Dear all,
I'm working on some CIDs regarding the EMLSR and EMLMR operation definitions. I've had quite a few suggestions for modifications to EMLSR operation and a new definition for EMLMR operation, through private emails and these are the current versions below.
However, since there appear to be lots of different opinions as to what EMLMR operation means, I thought I'd ask everyone to review these and provide me with some more comments.
enhanced
multi-link single radio (EMLSR) operation: A mode of operation that allows a non-access
point (non-AP) multi-link device (MLD) with multiple receive chains to listen
on a set of enabled links, for an initial Control frame sent by an AP affiliated with an AP MLD in
a non-high-throughput (non-HT) (duplicate) physical layer (PHY) protocol data
unit (PPDU) with one spatial stream, followed by frame exchanges on the link on
which the initial Control frame was received.
enhanced
multi-link multiple radio (EMLMR) operation: A mode of operation that allows any of the
stations (STAs) affiliated with a non-access point (AP) multi-link device (MLD)
on a set of enabled links, to support the transmission and reception of
physical layer protocol data units (PPDUs) with a number of spatial streams
that is indicated in the EML Control field of the EML OMN frame and that is
larger than the number of per-link spatial streams, through switching receive and
transmit chains among the enabled links, in a TXOP, after receiving the initial
frame from the associated AP affiliated with the AP MLD.
Kind regards
Stephen
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1