| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hi Jay, Thank you for the clarification about CID 10014 during the MAC adhoc meeting.
The Disabled Link Indication in MLD Parameters Subfield of TBTT Information field in RNR has already indicate the disabled state of the reported AP. Why would you want to introduce a duplicate way by using TBTT Information Field Type set
to 1? It would cause unnecessary complexity due to different TBTT Information field Type and format when the link is enabled and disabled based on current draft as below: In D2.1.1, it says: “If the TBTT Information Field Type subfield is 1, the TBTT Information Length subfield is set to 3, other values are reserved.
(#14144)For values higher than 3, the first 3 octets of the field contain the MLD Parameters subfield (i.e., same contents as when the length of the TBTT Information
field is 3) and the remaining octets are reserved.” What do you think? Thanks, Kaiying To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |