Hi Stephen,
Maybe replacing “then move to receive” with “then move to operate” would be more suitable. I’m expecting that the step after receiving the initial control frame would be for the non-AP MLD to transmit (just to let the AP MLD knows which
link has been selected).
Otherwise I’m OK simplifying the definition as long as we can make the distinction with the EMLMR’s one (which is what my comment was asking for).
Regards,
Massinissa
De : Stephen McCann <mccann.stephen@xxxxxxxxx>
Envoyé : mardi 13 septembre 2022 04:45
À : STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Objet : Re: [STDS-802-11-TGBE] [EXTERNAL] Re: [STDS-802-11-TGBE] EMLSR and EMLMR definitions
[EXTERNAL]-Real sender is:
owner-stds-802-11-tgbe@xxxxxxxxxxxxxxxxx
Thanks for your comments.Perhaps this would be suitable:
enhanced multi-link single radio (EMLSR) operation: A mode of operation that allows a non-access point (non-AP) multi-link device (MLD) with multiple receive chains to listen on a set of enabled links, then move to receive on one
link within the set, for the immediately following set of frame exchanges.
I am trying to avoid re-introducing the term "Control frame", as I really don't think this is appropriate for a definition.
One concern I have with your proposed definition is that while the term contains the words "single radio" the definition says "one or more" which can lead to confusion. Perhaps we need to focus
the definition not on how many radios the device has but on how many it
uses in the context of the EMLSR operation. While the former may be one or more, I believe the latter must be one.
I don't think the EMLSR definition is ambiguous. The current definition that I propose supports the second of your options.
Hi Stephen,
Just for my understanding--why is it better to stay silent and keep things ambiguous?? We have had enough discussion in the group that is rooted from this ambiguity. I think it is time to clear that out.
-
If EMLSR is only for single radio devices, I think it has to be stated in the spec clearly
-
If EMLSR is for both single and multiple radios devices, I think it also has to be stated in the spec clearly.
Best
Rubayet
From: Stephen McCann <mccann.stephen@xxxxxxxxx>
Sent: Monday, September 12, 2022 10:14 PM
To: Rubayet Shafin <r.shafin@xxxxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] EMLSR and EMLMR definitions
the current definition of EMLSR that I mentioned earlier, is silent about how many radios are present in the MLD. I think it's best left that way.
Hi Minyoung,
Do you intend to mean that a device that supports EMLSR can only have one radio? If you don’t intend to mean that, I think it would be better to clarify this rather than keeping the definition ambiguous on that aspect.
Best
Rubayet
From: Minyoung Park <mpark.ieee@xxxxxxxxx>
Sent: Monday, September 12, 2022 9:21 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] EMLSR and EMLMR definitions
Hi Stephen,
The EMLSR definitions is still not accurate.
A non-AP MLD doesn't move to receive on one available link but the listening operation includes the receiving function of the initial control frame on the set of enabled links. A non-AP MLD moves to one available link on which the initial control frame was
received and exchange frames.
Also deleting 'one or more radio(s)' would be better to avoid controversial discussions. (this wasn't in the original definition as well)
The following is my suggestion:
enhanced multi-link single radio (EMLSR) operation: A mode of operation that allows a non-access point (non-AP) multi-link device (MLD) with
multiple receive chains and with one or more radio(s), to listen on a set of enabled links, then move to
receive on one available link within the set on which the initial Control frame was received, for the immediately following set of frame exchanges.
I agree with the other comments that resources are not moved in an EMLSR mode, so I prefer my earlier definitions. This is what I propose to move forward with:
enhanced multi-link multiple radio (EMLMR) operation: A mode of operation that allows any of the stations (STAs) affiliated with a non-access point
(AP) multi-link device (MLD) on a set of enabled links, to move receive and transmit spatial streams to one link within the set, to increase resources on that link, for the immediately following set of frame exchanges. (#10935, #11820, #12035, #12706)
enhanced multi-link single radio (EMLSR) operation: A mode of operation that allows a non-access
point (non-AP) multi-link device (MLD) with multiple receive chains and with one or more radio(s), to listen on a set of enabled links, then move to receive on one available link within the set, for the immediately following set of frame exchanges.
Hi Stephen,
I also disagree with Eduard in the sense that the EMLSR is “applied to a single-radio non-AP MLD”. EMLSR is a mode of operation, not a device-level capability. EMLSR can be applied to both single radio and multi-radio devices. In other word, a device with
multiple radios may elect to operate on EMLSR mode on a subset of enabled links (EMLSR Links), while other radios can operate on non-EMLSR links.
I prefer your previous definition in this aspect.
Best
Rubayet
|
|
Caution: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
|
Hi Stephen,
I disagree with the statement from Eduard. The EMLSR doesn't move around resources between different links. Each STA's capability is announced during the association process and that capability is used in the EMLSR mode.
As I commented in the call last week, it would be better to focus on the EMLMR definition, which is what the commenter is asking for.
yes, I think that is reasonable.
Dear Stephen,
As far as I understood, EMLSR is the same as EMLMR, but applied to a
single-radio non-AP MLD. Therefore, I'd use the same phrasing in both
definitions, based on the EMLMR definition you proposed (which I find more
accurate). Something like:
"*enhanced multi-link single radio (EMLSR) operation:* A mode of operation
that allows a single-radio non-access point (non-AP) multi-link device
(MLD) with multiple receive chains, to listen on a set of enabled links,
then move receive and transmit spatial streams to one link within the set,
to increase resources on that link, for the immediately following set of
frame exchanges.
"
Note that, in the uplink, the non-AP MLD can choose to use its tx chain(s)
on a different link each time (i.e. not only moves rx chains).
Cheers,
Eduard
On Mon, September 12, 2022 12:03 am, Stephen McCann wrote:
> Dear all,
> thanks for all the further comments on this topic. These are
> the some updated definitions that I have produced based on the comments:
>
> *enhanced multi-link multiple radio (EMLMR) operation*: A mode of
> operation
> that allows any of the stations (STAs) affiliated with a non-access point
> (AP) multi-link device (MLD) on a set of enabled links, to move receive
> and
> transmit spatial streams to one link within the set, to increase resources
> on that link, for the immediately following set of frame exchanges.
> (#10935, #11820, #12035, #12706)
>
>
>
> *enhanced multi-link single radio (EMLSR) operation:* A mode of operation
> that allows a non-access point (non-AP) multi-link device (MLD) with
> multiple receive chains and with one or more radio(s), to listen on a set
> of enabled links, then move to receive on one available link within the
> set, for the immediately following set of frame exchanges.
>
> Kind regards
>
> Stephen
>
> On Sat, 10 Sept 2022 at 11:39, Mark Rison <m.rison@xxxxxxxxxxx> wrote:
>
>> > And for "all of the following frame exchanges" seems eternal in scope.
>> If this definition is intended to be read by someone lacking extensive
>> 802.11 knowledge then it could say, for "the immediately following set
>> of
>> frame exchanges"
>>
>>
>>
>> Or just leave the ending of the condition unstated:
>>
>>
>>
>> *enhanced multi-link single radio (EMLSR) operation:* A mode of
>> operation
>> that allows a non-access point (non-AP) multi-link device (MLD) with
>> multiple receive chains to listen on a set of enabled links, then switch
>> to
>> one available link within the set.
>>
>>
>>
>> > I think that at least for emlsr, instead of switch it might say
>> something like "receive"
>>
>> > It turns out that listening on the link on which receive is not
>> occurring is still possible during the receive
>>
>>
>>
>> You mean
>>
>>
>>
>> *enhanced multi-link single radio (EMLSR) operation:* A mode of
>> operation
>> that allows a non-access point (non-AP) multi-link device (MLD) with
>> multiple receive chains to listen on a set of enabled links, then
>> receive
>> to [on?] one available link within the set.
>>
>>
>>
>> ? That's not worse, but still doesn't explain the key point, which is
>> that the receive chains are reallocated to be used on the same channel.
>>
>>
>>
>> My suggestion would be:
>>
>>
>>
>> *enhanced multi-link single radio (EMLSR) operation:* A mode of
>> operation
>> that allows a non-access point (non-AP) multi-link device (MLD) to
>> listen
>> on a set of enabled links using one radio frequency (RF) chain on each,
>> and
>> then switch all the RF chains to one of the links for subsequent
>> single-user multiple input, multiple output (SU-MIMO) operation on that
>> link.
>>
>>
>>
>> Also, maybe it's because I wasn't there, but I find this definition
>> rather
>> confusing:
>>
>>
>>
>> *enhanced multi-link multiple radio (EMLMR) operation*: A mode of
>> operation that allows any of the stations (STAs) affiliated with a
>> non-access point (non-AP) multi-link device (MLD) on a set of enabled
>> links, to switch receive and transmit spatial streams of one available
>> link
>> within the set, to increase resources on that link, for all of the
>> following frame exchanges.
>>
>>
>>
>> I initially read "switch tx and rx" as being that tx becomes rx and rx
>> becomes tx.
>>
>> Even if it means "transfer both of them to another link" (i.e. you need
>> to
>> have
>>
>> a "to X" after the "switch"), isn't this a definition of EMLSR? What
>> does EMLMR
>>
>> do that EMLSR doesn't do?
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Mark
>>
>>
>>
>> --
>>
>> Mark RISON, Standards Architect, WLAN English/Esperanto/Français
>>
>> Samsung Cambridge Solution Centre Tel: +44 1223 434600
>>
>> Innovation Park, Cambridge CB4 0DS Fax: +44 1223 434601
>>
>> ROYAUME UNI WWW:
http://www.samsung.com/uk
>>
>>
>>
>> *From:* Matthew Fischer <matthew.fischer@xxxxxxxxx>
>> *Sent:* Friday, 9 September 2022 14:44
>> *To:* STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
>> *Subject:* Re: [STDS-802-11-TGBE] EMLSR and EMLMR definitions
>>
>>
>>
>> I think that at least for emlsr, instead of switch it might say
>> something
>> like "receive"
>>
>>
>>
>> It turns out that listening on the link on which receive is not
>> occurring
>> is still possible during the receive
>>
>>
>>
>> And for "all of the following frame exchanges" seems eternal in scope.
>> If
>> this definition is intended to be read by someone lacking extensive
>> 802.11
>> knowledge then it could say, for "the immediately following set of frame
>> exchanges"
>>
>>
>>
>>
>>
>>
>>
>> On Fri, Sep 9, 2022, 2:19 PM Stephen McCann <mccann.stephen@xxxxxxxxx>
>> wrote:
>>
>> Dear all,
>>
>> thanks for your comments following my presentation of
>> 11-22-1196r3.
>>
>>
>>
>> Here are the revised definitions that I presented:
>>
>>
>>
>> *enhanced multi-link multiple radio (EMLMR) operation*: A mode of
>> operation that allows any of the stations (STAs) affiliated with a
>> non-access point (non-AP) multi-link device (MLD) on a set of enabled
>> links, to switch receive and transmit spatial streams of one available
>> link
>> within the set, to increase resources on that link, for all of the
>> following frame exchanges.
>>
>>
>>
>> *enhanced multi-link single radio (EMLSR) operation:* A mode of
>> operation
>> that allows a non-access point (non-AP) multi-link device (MLD) with
>> multiple receive chains to listen on a set of enabled links, then switch
>> to
>> one available link within the set, for all of the following frame
>> exchanges.
>>
>>
>>
>> Please let me know if you have any further suggestions. If we can
>> converge
>> on suitable text, then I can represent an updated submission next week.
>>
>>
>>
>> Kind regards
>>
>>
>>
>> Stephen
>> ------------------------------
>>
>> To unsubscribe from the STDS-802-11-TGBE list, click the following link:
>>
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
>>
>> ------------------------------
>>
>> To unsubscribe from the STDS-802-11-TGBE list, click the following link:
>>
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
>> ------------------------------
>>
>> To unsubscribe from the STDS-802-11-TGBE list, click the following link:
>>
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
>>
>
> ________________________________________________________________________
> To unsubscribe from the STDS-802-11-TGBE list, click the following link:
>
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
>
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
Ce courriel et les documents qui lui sont joints sont, sauf mention contraire, présumés de nature confidentielle et destinées à l'usage exclusif du ou des destinataire(s) mentionné(s). Si vous n'êtes pas le ou les destinataire(s), vous êtes informé(e) que toute divulgation, reproduction, distribution, toute autre diffusion ou utilisation de cette communication ou de tout ou partie de ces informations est strictement interdite, sauf accord préalable de l’expéditeur. Si ce message vous a été transmis par erreur, merci d’immédiatement en informer l'expéditeur et supprimer de votre système informatique ce courriel ainsi que tous les documents qui y sont attachés. En vous remerciant de votre coopération.
This email and any attached documents are, unless otherwise stated, presumed to be confidential and intended for the exclusive use of the recipient(s) mentioned. If you are not the recipient(s), you are informed that any disclosure, reproduction, distribution, any other dissemination or use of this communication or all or part of this information is strictly prohibited, unless agreed beforehand by the sender. If you have received this e-mail in error, please immediately advise the sender and delete this e-mail and all the attached documents from your computer system. Thanking you for your cooperation.
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
|