Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] 2*996+484-tone MRU support

Thanks a lot, Eunsung.

 

Let us keep it consistent for OFDMA case for [gap] RUs. Adding constrictions is more difficult since we removed 240MHz PPDU so it is hard to justify why 996 can not be assigned.

 

Thanks again,

Jianhan

 

From: Eunsung Park <esung.park@xxxxxxx>
Sent: Monday, September 12, 2022 8:23 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] 2*996+484-tone MRU support

 

Thanks Ross and Jianhan. In my opinion, it would be better to follow the SFD but I agree that we don’t have to waste RU / MRU for OFDMA transmission. If group agrees, Jianhan you can reject my comment.

 

Best regards,

Eunsung

 

 

From: Jianhan Liu [mailto:00001c2ebe33e92d-dmarc-request@xxxxxxxxxxxxxxxxx]
Sent: Tuesday, September 13, 2022 11:53 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] 2*996+484-tone MRU support

 

Hi Ross,

 

Thanks for your comment. I also remember this motion is SFD. But I can not find the corresponding text of the constrictions in the 11be draft. The motion also did not clearly say if it is for OFDMA or non-OFDMA or both.

 

According to the general rule in 11be, in OFDMA, [gap] RU or MRU can be assigned to other users. For example, it is weird to allow Gap 484-tone RU can be assigned to other users but [gap 996-tone RU] can not be assigned.

 

So I think allowing it being assigned makes more sense.

 

Thanks,

JI\ianhan

 

From: Yujian (Ross Yu) <00001792b51ef4ea-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Monday, September 12, 2022 7:43 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] 2*996+484-tone MRU support

 

Hi Jianhan and all,

Below is the most relevant motion regarding 2*996+484-MRU support. It doesn’t identify OFDMA or non-OFDMA. For the spec draft, I didn’t find clear restrictions so far. I am open on either adding the restriction or not.

 

regards

Ross Jian Yu 于健

Huawei Technologies

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1