Hi Minyong,
For the CIDs that have been presented in doc 340, please find the following two comments:
- For the single link EMLSR. It’s better to clarify by adding something similar highlighted as below:
The EMLSR links shall be indicated in the EMLSR Link Bitmap subfield of
the EML Control field of the EML Operating Mode Notification frame by setting the bit positions of the
EMLSR Link Bitmap subfield to 1……
Note: a non-AP MLD might only set one bit to 1 in the bit positions of the EMLSR Link Bitmap subfield when the non-AP MLD enables the EMLSR
operation mode.
-
For the rule below, need to clarify if other frames, if sent by AP MLD on one of the EMLSR links, need to precede by the initial control frame, or restrict that EML OMN is the only frame send to the non-AP
MLD before EMLSR mode is enabled…
(#17877)If transmitted on one of the EMLSR link(s), the EML Operating Mode Notification
frame transmitted by the AP affiliated with the AP MLD shall be preceded by an initial Control frame.
BRs.
Xiaogang
From: Minyoung Park <mpark.ieee@xxxxxxxxx>
Sent: Friday, March 10, 2023 3:10 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] Teleconference Agendas For Next Week: Uploaded
Hi Alfred,
Please add one more CR doc to the MAC queue:
All - please review the document and let me know if you have any comments/suggestions. The changes are mostly related to EMLSR enable/disable procedures (restructuring so that it is more readable).
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1