| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi all,r3 was uploaded based on the discussions this morning. Sounding related changes are pasted below. Feel free to comment. Thanks.Proposed changes:
11be editor please add the following paragraph in P.L. 618.43 (35.7.3 Rules for EHT sounding protocol sequences).
A beamformer shall address a beamformee that is affiliated with a non-AP MLD operating in EMLSR or EMLMR mode only in the first BFRP Trigger frame of a sounding sequence.
In addition, modify the paragraph below in P.L. 618.36
An EHT beamformer that initiates an EHT TB sounding sequence shall transmit an EHT NDP Announcement frame with two or more STA Info fields and the RA field set to the broadcast address. The EHT NDP Announcement frame shall be followed after a SIFS by an EHT sounding NDP, which shall be followed after a SIFS by a BFRP Trigger frame. If more than one BFRP Trigger frames are present in a sounding sequence, the EHT TB PPDU that contains the EHT Compressed Beamforming/CQI frame(s) shall be followed, after a SIFS, by another BFRP Tigger frame until the last EHT Compressed Beamforming/CQI frame in a sounding sequence is transmitted. Each EHT beamformee that is addressed by a BFRP Trigger frame shall respond after a SIFS with an EHT TB PPDU containing one or more EHT Compressed Beamforming/CQI frames.
On Sat, May 13, 2023 at 11:31 PM Xiaogang Chen <xiaogang.g.chen@xxxxxxxxx> wrote:Hi Alfred,Can you help to add the following contribution in the queue of the joint session? Thanks.Hi all,Please feel free to review the sounding related CIDs on page 4,5 if interested.BRs,Xiaogang.
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1