Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGBE] CID 15580

Hi Youhan et al,

 

Thanks for your discussions and suggestions to the resolutions of CID 15580.

 

There are some difference between your suggestions and the proposed solutions:

 

  1. I do not think we need to delete the paragraph (starting P622L10 in 802.11be D3.1). Because the similar paragraph has been existing in Rules for VHT sounding protocol sequences (REVme D3.0 10.35.5.3, P2043L4).
  2. The paragraph you suggested to add from 26.5.2.2.2 (REVme D3.0 P3862L54) does not emphasize to follow the maximum PPDU duration. That is why I made some modifications as below, i.e., “without exceeding the maximum PPDU duration” is added to the paragraph.

 

CID 15580, 17074

 

CID

Clause

P.L

Comment

Proposed Change

Resolution

15580

35.7.3

616.10

If neither the EHT compressed beamforming report information nor the EHT MU exclusive beamforming report information is included, what shall be included in this case?

Add text describing what shall be included or what shall be done in such a case.

Revised. Agree with the comment in principle.

 

Per discussions within the group, the paragraph is copied from 26.5.2.2.2 (REVme D3.0 P3862L54) and “without exceeding the maximum PPDU duration” is added.

 

TGbe editor: make change in THIS DOCUMENT with tag 15580

17074

35.7.3

616.10

"An EHT beamformee that transmits EHT compressed beamforming feedback shall include neither the EHT
compressed beamforming report information nor the EHT MU exclusive beamforming report information if
the transmission duration of the PPDU carrying the EHT compressed beamforming report information and
any EHT MU exclusive beamforming report information would exceed the maximum PPDU duration (see
Table 9-34 (Maximum data unit sizes (in octets) and durations (in microseconds)))." -- in the baseline the things that are actually frame names are capitalised

Follow baseline

Accepted

Please let me know if you have any questions/comments.

 

Copy to the 11be reflector for everyone’s knowledge about this change.

 

Thank you very much for your help with resolving this CID.

 

Best regards,

Zinan

 

 

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1