Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
> If there are something that I am not considered or people has strong opinion to keep the current proposed
text here, I suggest to change “
doesn’t
have dot11RestrictedTWTOptionImplemented set to true”
to “has
dot11RestrictedTWTOptionImplemented set to false”. There is a potential difference in the situation where the MIB attribute in question does not exist.
See Subclause 1.4: (#2005)A reference to a value of a MIB attribute of the form “if <MIB attribute> is <x>” is to be interpreted as though written “if <MIB attribute> is present and is <x>”. A reference to a value of a MIB attribute of the form “if <MIB attribute> is not <x>” is to be interpreted as though written “if <MIB attribute> is not present, or is present and is not <x>”. Thanks, Mark --
Mark RISON, Standards Architect, WLAN English/Esperanto/Français Samsung Cambridge Solution Centre Tel: +44 1223 434600 Innovation Park, Cambridge CB4 0DS Fax: +44 1223 434601 ROYAUME UNI WWW:
http://www.samsung.com/uk From:
全映桥
(Yingqiao Quan) <yingqiao.quan@xxxxxxxxxx> Hi Chunyu, Thanks for your document. There are some minor concern for the proposed text of CID# 16146.
1.
What is the definition of
“the
Broadcast TWT advertising Management frames”
? Does it refer to Beacon, Probe/(re)Association Request/Response frames? It might be clarified.
2.
IMO, how does the non-AP EHT STAs that don’t
support R-TWT recognize the overlapping quiet is implementation dependent and is out of the scope of this standard, so we may just simply point it out.
3.
If there are something that I am not considered or people has strong opinion to keep the current
proposed text here, I suggest to change “
doesn’t
have dot11RestrictedTWTOptionImplemented set to true”
to “has
dot11RestrictedTWTOptionImplemented set to false”.
(#16146)NOTE3—An
EHT non-AP STA that is not a member of an R-TWT SP or
that doesn’t have dot11RestrictedTWTOptionImplemented
set to true might parse the TWT element in the Broadcast TWT advertising Management frames and decide whether an quiet interval is an overlapping one and decide whether to
ignore it. BR, Yingqiao Quan Communication Standards Devision 发件人:
Chunyu Hu <chunyuhu07@xxxxxxxxx>
Hi, all:
We deferred a few CIDs in presenting 11-23/847r1. Would the folks requesting the deferral or comments please review and/or share any further thoughts you may
have on the CIDs below? 16700, 16701: @Yonggang Fang 15935, 16652: @Gaurang Naik 16678: @Qi Wang 16420, 16424: @Jeongki Kim 15834, 17090: revised per discussion in mtg. @Mark Rison @Rubayet
Shafin would you please review? Let me know if I miss any. Thx! Chunyu To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |