Hello Cheng,
Thanks for this.
As discussed during the call, it might be good to be more
specific as to the intent:
- I assume there cannot be more than one setup phase or termination phase
(if you want it to be possible to have more than one setup phase to change
the setup, a bit like FTM, this should be explicit)
- I think there has to be at least one measurement phase, otherwise
there's no sensing
- I assume the intent is that for radar-type operations where everything
is done at the same STA, there is no setup phase?
- The possibility of alternating measurement and reporting phases should
be allowed for
- The order of the phases wasn't explicit
So maybe something like (assuming I've understood the intent correctly):
·
A sensing session is composed of:
o
Zero or one setup phase, where a sensing session is established, and operational parameters associated with the sensing session are determined and may be exchanged between STAs.
o
One or more measurement phases, where sensing measurements are performed.
o
Zero or more reporting phases, where sensing measurement results are reported.
o
Zero or one termination phase, where STAs stop performing measurements and terminate the sensing session.
·
The setup phase, if present, is the first phase in the session
·
The termination phase, if present, is the last phase in the session
·
Measurement and reporting phases, if both present, can alternate
?
Thanks,
Mark
--
Mark RISON, Standards Architect, WLAN English/Esperanto/Français
Samsung Cambridge Solution Centre Tel: +44 1223 434600
Innovation Park, Cambridge CB4 0DS Fax: +44 1223 434601
ROYAUME UNI WWW:
http://www.samsung.com/uk
From: Chen, Cheng <cheng.chen@xxxxxxxxx>
Sent: Tuesday, 9 March 2021 15:24
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBF] TGbf meeting on March 9, 12, 15 (Tuesday, Friday, Monday), 9:00 – 11:00am ET
Hi Tony,
I would like to submit a motion request to run the motion corresponding to the SP I already ran in contribution 20/1851r4. Please queue it in the agenda. Thanks.
Move to add the following to 11bf SFD:
·
A sensing session is composed of one or more of the following phases: setup phase, measurement phase, reporting phase, and termination phase.
o
In the setup phase, a sensing session is established, and operational parameters associated with the sensing session are determined and may be exchanged between STAs.
o
In the measurement phase, sensing measurements are performed.
o
In the reporting phase, sensing measurement results are reported.
o
In the termination phase, STAs stop performing measurements and terminate the sensing session.
Best,
Cheng
From: Hanxiao (Tony, WT Lab) <tony.hanxiao@xxxxxxxxxx>
Sent: Monday, March 1, 2021 10:29 PM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBF] TGbf meeting on March 9, 12, 15 (Tuesday, Friday, Monday), 9:00 – 11:00am ET
Dear all,
This is a reminder and
call for submissions for the upcoming
meeting
on
March 9, 12, 15 (Tuesday, Friday, Monday), 9:00 – 11:00am ET.
The initial agenda document is posted:
https://mentor.ieee.org/802.11/dcn/21/11-21-0206-01-00bf-tgbf-meeting-agenda-2021-03-plenary.pptx
Please note:
1.
Please
send the
agenda request
at least
24 hours
prior to the call, following the format below:
•
DCN, Title, Author (affiliation), Time duration
2.
I will cancel the call if there is no request received 24 hours prior to a call.
3.
Please
upload
your submissions (revision 0) on mentor
24 hours
prior to the meeting so that members would have a chance to review those submissions offline. Otherwise,
a.
If there is not enough time during the meeting, the presentation will be delayed to the next meeting.
b.
If there is enough time during the meeting, the presentation will be moved to the end of the queue and
be presented in the end. However, any related SP should be delayed to the next meeting.
4.
Please send the
motion
request around
10+5 days
before the meeting (for teleconference, not for Plenary or Interim meeting), so that the TG chair could send the 10 day advance
notice to the 802.11 reflector, after getting the approval from the WG chair.
5.
Dial-in information:
March 9
Join the Webex meeting here:
https://ieeesa.webex.com/ieeesa/j.php?MTID=m44b9a101fca23b0465ca437737583904
Meeting number: 179 350 0378
Meeting password: wireless (94735377 from phones and video systems)
Join by phone: Tap to call in from a mobile device (attendees only)
+1-408-418-9388 USA Toll
Global
call-in numbers
Access code: 179 350 0378
Join from a video system or application Dial
1793500378@xxxxxxxxxxxxxxxx
You can also dial 173.243.2.68 and enter your meeting number.
Join using Microsoft Lync or Microsoft Skype for Business Dial
1793500378.ieeesa@xxxxxxxxxxxxxx
Need help? Go to http://help.webex.com
March 12
Join the Webex meeting here:
https://ieeesa.webex.com/ieeesa/j.php?MTID=mafae383ba80c3a260ab8c4506760837d
Meeting number: 179 102 1699
Meeting password: wireless (94735377 from phones and video systems)
Join by phone: Tap to call in from a mobile device (attendees only)
+1-408-418-9388 USA Toll
Global
call-in numbers
Access code: 179 102 1699
Join from a video system or application Dial
1791021699@xxxxxxxxxxxxxxxx
You can also dial 173.243.2.68 and enter your meeting number.
Join using Microsoft Lync or Microsoft Skype for Business Dial
1791021699.ieeesa@xxxxxxxxxxxxxx
Need help? Go to
http://help.webex.com
March 15
Join the Webex meeting here:
https://ieeesa.webex.com/ieeesa/j.php?MTID=m9e43b35ece00c49577d0ab50cf499697
Meeting number: 179 089 3380
Meeting password: wireless (94735377 from phones and video systems)
Join by phone: Tap to call in from a mobile device (attendees only)
+1-408-418-9388 USA Toll
Global
call-in numbers
Access code: 179 089 3380
Join from a video system or application Dial
1790893380@xxxxxxxxxxxxxxxx
You can also dial 173.243.2.68 and enter your meeting number.
Join using Microsoft Lync or Microsoft Skype for Business Dial
1790893380.ieeesa@xxxxxxxxxxxxxx
Need help? Go to
http://help.webex.com
Best Regards : )
Tony Xiao
Han
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1