Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBF] TGbf meeting on July 27 (Tuesday), 10:00am – 12:00pm ET



Hi Cheng,

 

I also have a question regarding the motion; as we discussed in the past, I believe the motion is based on 11az ranging procedure and STAs that do not support/implement 11az will not be able to participate, right?

 

If so, could we make that clear in the motion text, perhaps as a Note:

 

Note: The above Trigger-based sensing measurement instance is optional for pre-11az STAs.

 

Thanks.

 

Regards,

Rojan

 

From: Chen, Cheng <cheng.chen@xxxxxxxxx>
Sent: Wednesday, July 28, 2021 11:46 AM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBF] TGbf meeting on July 27 (Tuesday), 10:00am – 12:00pm ET

 

Hi Xiandong,

 

The word “optional” basically means the presence of UL and DL sounding depends on whether there is at least one sensing transmitter or sensing receiver that responds in the polling process. If there is no STA that is a sensing transmitter responded in the polling, then there is no UL sounding part; if there is no STA that is a sensing receiver responded in the polling, there is no DL sounding part.

 

Best,

Cheng

 

From: 董贤东 <dongxiandong@xxxxxxxxxx>
Sent: Tuesday, July 27, 2021 8:07 PM
To: Chen, Cheng <cheng.chen@xxxxxxxxx>; STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: 答复: TGbf meeting on July 27 (Tuesday), 10:00am – 12:00pm ET

 

Hi Cheng,

 

I have a clarification question regarding the wording “optional” in 2nd bullet and 3rd bullet of the motion text, my interpretation is that a STA can optionally send the UL sounding frame even though it indicated its availability and transmitted in the polling procedure.

 

Best Regards,

Xiandong Dong

 

发件人: Chen, Cheng <cheng.chen@xxxxxxxxx>
发送时间: 2021727 23:27
收件人: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBF] TGbf meeting on July 27 (Tuesday), 10:00am 12:00pm ET

 

Hi Tony,

 

I would like to submit the following motion request based on the SP result (26Y 0N 13A) I ran today.

 

Motion:

Move to add the following to 11bf SFD:

·        11bf shall define a Trigger-based sensing measurement instance including the following:

o   A polling process where an AP sends a Trigger frame to check the availability of STAs. If a STA is available, it responds with a CTS-to-self.

o   An optional UL sounding where an AP sends a Trigger frame to solicit NDP transmission(s) from STA(s).

§  The UL sounding is present if at least one STA that is a sensing transmitter responds in the polling.

o   An optional DL sounding where an AP sends NDPA frame followed by NDP to STA(s).

§  The DL sounding is present if at least one STA that is a sensing receiver responds in the polling.

o   The order of the UL and DL sounding is TBD.

o   The details of the format of the Trigger frame and the NDPA frame are TBD.

 

Best,

Cheng

From: Hanxiao (Tony, WT Lab) <tony.hanxiao@xxxxxxxxxx>
Sent: Thursday, July 22, 2021 4:17 AM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBF] TGbf meeting on July 27 (Tuesday), 10:00am – 12:00pm ET

 

Dear all,

This is a reminder and call for submissions for the upcoming meeting on July 27 (Tuesday), 10:00am – 12:00pm ET. 

 

Please note:

  1. Please send the agenda request at least 24 hours prior to the call, following the format below:

     DCN, Title, Author (affiliation), Time duration

  1. I will cancel the call if there is no request received 24 hours prior to a call.
  2. Please upload your submissions (revision 0) on mentor 24 hours prior to the meeting so that members would have a chance to review those submissions offline. Otherwise,
    1. If there is not enough time during the meeting, the presentation will be delayed to the next meeting.
    2. If there is enough time during the meeting, the presentation will be moved to the end of the queue and be presented in the end. However, any related SP should be delayed to the next meeting.
  3. Please send the motion request around 10+5 days before the meeting (for teleconference, not for Plenary or Interim meeting), so that the TG chair could send the 10 day advance notice to the 802.11 reflector, after getting the approval from the WG chair.

Meeting number: 179 690 7292

Meeting password: wireless (94735377 from phones and video systems)

Join by phone: Tap to call in from a mobile device (attendees only) +1-408-418-9388 USA Toll
Global call-in numbers

Access code: 179 690 7292

Join from a video system or application Dial 1796907292@xxxxxxxxxxxxxxxx You can also dial 173.243.2.68 and enter your meeting number.

Join using Microsoft Lync or Microsoft Skype for Business Dial 1796907292.ieeesa@xxxxxxxxxxxxxx

Need help? Go to http://help.webex.com

Best Regards : )

Tony Xiao Han


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1