Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBF] Motion request



Hi Tony,

 

I would appreciate if you could run the motion below in a future meeting as appropriate. Thanks.

The reference document is 11-21/1433r2.  SP result was 19/4/13.

 

Move to add the following to the TGbf SFD:

    • 11bf shall define a non-Trigger based (non-TB) sensing measurement instance as follows:
      • One non-AP STA is the sensing initiator and one AP is the sensing responder.
      • Once the non-AP STA obtains a TXOP, it shall initiate a non-TB sensing measurement instance by transmitting an NDPA frame to the AP followed by an Initiator-to-Responder (I2R) NDP SIFS after. SIFS after the I2R NDP, the AP shall transmit a Responder-to-Initiator (R2I) NDP to the non-AP STA.
      • If the non-AP STA is only the sensing transmitter, then the NDPA frame should configure the R2I NDP to be transmitted with minimum possible length with one LTF symbol.
      • If the non-AP STA is only the sensing receiver, then the NDPA frame should configure the I2R NDP to be transmitted with minimum possible length with one LTF symbol.
      • The details of the NDPA frame are TBD.

 

 

Best,

Cheng

 

 

From: Claudio Da Silva <000015f3cbee3aeb-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Tuesday, November 30, 2021 10:59 AM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBF] Motion request

 

Tony,

 

I would appreciate if you could run the motion below in a future meeting as appropriate.

The reference document is 11-21/1692r4.  SP result was 30/2/8.

Thanks,

 

Claudio

 

 

Move to add the following to the TGbf SFD:

 

A sensing by proxy (SBP) procedure is defined in which:

  • An “SBP request” consists of a non-AP STA sending an SBP Request frame to an SBP-capable AP STA.
    • An STA that sends an SBP Request frame to invoke SBP (and, as a result, WLAN sensing) is denoted by “SBP requesting STA”.
    • The format and contents of the SBP Request frame are TBD.
  • An AP STA that receives an SBP request shall send to the SBP requesting STA an SBP Response frame to accept or reject the request.
    • The format and contents of the SBP Response frame are TBD.
  • An AP STA that accepts an SBP request shall initiate WLAN sensing procedure(s) with one or more non-AP STA(s) using operational parameters derived from those indicated within the SBP Request frame.
  • Measurement results obtained in WLAN sensing procedure(s) resultant from an SBP request shall be reported to the SBP requesting STA.

To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1