Hi Tony,
Please run the following motions at the next available opportunity (strawpoll results provided as reference).
Motion 1:
Move to add the following text to the SFD:
- EDMG transmitter initiator bi-static sensing is based on a BRP request in a BRP-RX/TX, BRP-TX, BRP-RX PPDU and the BRP response
- Feedback for the measurement is carried in the BRP response
- Feedback may be delayed
- Feedback may be aggregated (single feedback for some measurements, to facilitate doppler measurement)
SP Result: Y/N/A: 12/1/22
Motion 2:
Move to add the following text to the SFD:
- EDMG/DMG sensing receiver initiator bi-static sensing is based on a BRP request frame that includes a request for the responder to transmit a BRP-RX/TX, BRP-TX, BRP-RX PPDU.
SP Result: Y/N/A: 11/0/18
Motion 3:
Move to add the following text to the SFD:
- EDMG/DMG Bi/multi-static sensing capability set may include (at least):
- TRN field Golay sequence lengths supported
- number of directions in Tx and Rx (Number of Tx/RX AWV sets used for sensing)
- Feedback capabilities
- Beam sets in which every beam has direction, gain, and beam width.
Result: Y/N/A: 12/0/18
Motion 4:
Move to add the following text to the SFD:
- In an EDMG/DMG Bi/Multi-static measurement setup exchange (at last) the following parameters exchanged:
- set of beam directions in TX (sets of TX AWV settings to be used in the measurements)
- set of beam directions in RX (sets of RX AWV settings to be used in the measurements)
- beamforming TRN field information such as TRN-P, TRN-M, TRN-N
- location and orientation of each of the STAs
- coordinates can be local or earth coordinates
- relative locations orientation may be estimated using TGaz based exchanges or available from management layer
- Scheduling
Result: Y/N/A: 10/1/21
Thanks,
Assaf Kasher
To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1